“Why Your Motorbike’s Front Brakes Are Braking Themselves and How to Fix It”

The front brake of the motorbike braking itself will disturb the rider. The condition of the motorbike’s front brakes that can brake on their own will cause problems. You need to immediately find out the cause of the problem with the motorbike brakes.

The braking system on a motorbike can have problems. Both the position of the front brake and the rear brake of the motorbike.

Read Also: Disc Brakes Lock Up, These Are the Causes and How to Avoid It

Maybe you have experienced a problem with the front brake of the motorbike. While driving, suddenly the front brake actually brakes itself. If this problem is left unchecked it will endanger the driver.

The front brakes of the motorbike brake themselves, here are the causes

One component of a vehicle that has an important role is the brake. Both the front and rear brakes need to function optimally. So you can use the vehicle properly.

Brakes in good condition are an absolute requirement that you need to check before driving. It is important for you to ensure that these components are properly maintained, without any problems.

However, the brake components on a vehicle can experience problems at any time. If the front brake is braking itself will be a problem. It can even be dangerous for the motorcyclist.

This problem occurs when the front brake of the motorbike suddenly operates on its own. Even if you don’t brake. Of course this problem can occur due to various different reasons.

So it is necessary to immediately find out the cause so that you can handle it appropriately. As for some of the causes of the front brake of the motorbike braking itself are as follows.

Worn Brake Caliper Rubber

If the brake caliper rubber is worn or mismatched, it can cause self-braking brake problems. This is because the rubber that covers the brake calipers is damaged or cannot withstand the pressure exerted by the brake system.

For this reason, the brake caliper piston continues to press the brake plate without the rider knowing it. So you need to replace worn or incompatible brake caliper rubber with new ones.

Unstable Brake Pressure

Unstable brake pressure conditions can also be another cause of self-braking brakes. There is air in the brake system or when there is a leak in the brake system.

Read Also: The Function of Small Holes on Disc Brakes, Check So You Don’t Get Curious!

This leak causes the brake pressure to become unstable. So that the brake caliper piston continues to press the brake plate. You can try repairing or replacing a leaky brake system.

Shifted Brake Caliper Piston

The front brakes of the motorbike braking themselves can occur due to a shifted brake caliper piston. The problem occurs when the brake caliper piston cannot return to its original position after the rider releases the brake pedal.

For this reason, the brake caliper piston will press against the brake plate, even when you are not braking. You can clean and check the brake caliper piston. This method will ensure that the piston can return to its original position easily.

Incorrect Gas Cable Tension

You need to know that the throttle cable tension that doesn’t fit can be another cause of the front brakes braking on their own. It is possible that the gas cable tension is too tight and it causes the gas to get stuck.

This puts pressure on the brake system. It even causes the front brake to brake itself. You will need to adjust the throttle cable tension so that it is not too tight.

The Front Brakes Of The Motor Brake themselves Due to Excessive Brake Use

Excessive use of the brakes can also cause the brakes to brake on their own. Riders may use the front brake too often. Even using the front brake is too hard.

Eventually the brake plate gets too hot and melts. So that it sticks to the brake rotor and makes it brake itself. Be sure to limit use of the front brake or consider installing larger brake discs.

Motor Rarely Cleaned

Motor that is rarely cleaned can cause problems in the vehicle. Small but vital components become damaged quickly.

Read Also: Advantages of Using ABS Brakes on Motorcycles and Cars

One component that is quite influential is the brakes. Besides being difficult for you to clean, the inside of the brakes is also prone to damage. Especially if there is too much dust or dirt attached.

If you experience a motorbike that brakes itself, it can occur due to too much dirt on the brake piston and caliper boot. Motorcycle brakes become unable to function optimally.

You can’t underestimate the front brakes on the motorbike itself. It is important for you to immediately check the vehicle to find out the cause. (R10/HR-Online)