AKURAT.CO, Last October, Xiaomi launched the POCO X3 NFC as smartphone that offers the allure of savage performance at an attractive price, exclusive features and a design that defies the flow.
Through the session teardown, Xiaomi provides an opportunity for anyone to take a close look at the reasons POCO X3 NFC has the nickname “The Real Mid-Range Killer”.
Session teardown done virtually by Woro Prasetio, Senior Technical Support Engineer of Xiaomi Indonesia and Andi Renreng, Product PR Manager of Xiaomi Indonesia, to show that the POCO X3 NFC uses the best components at real prices. Xiaomi warns that this should only be done by experienced people.
also read:
Some things that make the POCO X3 NFC special are the use chipset Snapdragon 732G, LiquidCool Technology 1.0 Plus cooling technology, display with refresh rate 120Hz as well touch sampling rate 240Hz, and a 5,160 mAh battery with 33W charging support.
Don’t miss the Quad-Camera system with an IMX682 sensor with 64MP resolution to capture the best moments with photos and videos, as well as features haptic feedback which provides an experience for the user through the z-axis linear motor.
“POCO X3 NFC is ‘The Real Mid-Range Killer’ which offers unparalleled technology and innovation at attractive prices, “said Xiaomi Indonesia Product PR Manager, Andi Renreng.
The first step of the session teardown is to open the back cover smartphone with equipment suction cup having previously heated it to make it easier for the glue to come off.
The NFC module is the first component to be removed, this feature makes POCO X3 NFC very useful for users who take advantage of it smartphone them for various needs like top-up electronic money, or communication with other devices more quickly.
The camera is the next component that is removed after dismantling the back cover by removing the 11 bolts and then removing the entire inter-board (BTB) connector. In the same section there are also speakers and sensors that are also removed.
POCO X3 NFC has four cameras on the back, the main camera has a resolution of 64 megapixels accompanied by a 13MP wide camera, 2MP macro camera, and depth sensor 2MP. Main camera smartphone It has f / 1.89 aperture and 1.6μm 4-in-1 Super Pixel for sharp image resolution, as well as a number of interesting camera features for taking photos and videos.
The front camera module is a component that is removed further, POCO X3 NFC has a front camera with 20MP resolution to capture personal experiences through selfies or selfie.
Proceed to the protector sub-board which is then shown to be a motor that produces vibrations that are captured by the user’s finger in the form haptic feedback. Z-Axis Motor is a feature that provides a complete experience to users through feedback in the form of 150 variations of vibration for each activity carried out on smartphone.
In session teardown Also demonstrated by Xiaomi’s efforts to ensure the POCO X3 NFC has IP53 protection in the form of rubber installation around the body and the use of tight glue to ensure the camera module is firmly attached.
Do not miss some components shown directly such as chipset Snapdragon 732G from Qualcomm which is now chipset the best 700 series today.
The fast performance of the POCO X3 NFC is supported by a 5160 mAh battery and 33W fast charging which can last up to two days with fair use. It only takes 65 minutes to fill up to 100% while within 30 minutes it can be filled to 62%.
Charging the battery on the POCO X3 NFC also has a technique Middle Middle Tab (MMT) which starts from the center of the battery module so that it spreads evenly to the top and bottom, the aim is to produce a consistent charging speed rather than layout generally starting at the bottom.
POCO X3 NFC cooling technology, namely LiquidCool Technology 1.0 Plus, is shown by prying down the battery to reveal a copper rod to relieve heat from the components above it from the battery and SoC. This technology is a development of LiquidCool Technology 1.0 used by POCOPHONE F1 with a wider surface.
–
