Home » Technology » TYPECASE MU-KB201T Flexbook Touch Bluetooth Keyboard Case for iPad User Manual

TYPECASE MU-KB201T Flexbook Touch Bluetooth Keyboard Case for iPad User Manual


TYPECASE MU-KB201T Flexbook Touch Bluetooth Keyboard Case for iPad

TYPECASE MU-KB201T Flexbook Touch Bluetooth Keyboard Case for iPad

SUPPORT TECHNIQUE

If you have any problems or questions, let us know ASAP! We would love to take care of you and make you happy right away! All units come with a full 12 month warranty, so you can relax and be comfortable with your purchase.
For the fastest, most user-friendly support, contact us (not Amazon) through any of the contact methods below.

  1. Email: [email protected]
  2. Telephone: 832 – 303 – 5080
  3. Chat: https://typecase.co/support

COMPATIBILITY

Compatible with iPadOS 13 (and newer). We recommend that you update your iPadOS to 13.4.1 for better performance.

To check your iPad system version:
  1. Go to Settings> General> About> Software version.
  2. Upgrade your version to iPadOS 13.4.1 or later to properly use the touchpad feature.

To check your iPad System Version

To upgrade your iPadOS to the latest version:
  1. Open your device settings> General> Software update.
    To upgrade your iPadOS to the leatest version
  2. Tap Download & Install.

* If you see Resume Download, tap it instead.

SETUP

To pair with your iPad
  1. Set the ON / OFF switch to the ON position.
    Configure 01
  2. The Bluetooth indicator will start blinking.
    If the Bluetooth indicator does not start flashing, press and hold the “Pair” button for 3 seconds.
    Configure 02
  3. Turn on Bluetooth in the Settings app (the device is connected when the Bluetooth indicator stops flashing).
    Configure 03
  4. Tap “Typecase Flexbook” under “MY DEVICES” in the Bluetooth section of the Settings app.
  5. Press “Pair” in the pop-up window as shown below.
    Configure 04* When pairing with new devices, please repeat steps 1 to 3.
    The pairing process is considered complete after the “Connected” indicator appears.
If your system is 13.3.1, please follow the steps to enable the touchpad function
  1. Go to Settings> Accessibility> Touch.
  2. Make sure the Assistive Touch option is enabled.

Assistive tactile

SHORT CARD

Note: Hold down the CMD button in any application for view shortcuts available.

Shortcuts Map

TOUCH FUNCTION

Opinion: Make sure Bluetooth is connected and the touchpad function is enabled!

One finger press mode

One finger press mode

Action 1: press the main interface once;
Function: manipulation of the mouse cursor.
Action 2: press twice and drag; Function: select or move icons
Exit the mode: refer to the correct instruction.

Two-finger tap mode

Two Finger Tap Mode

Action 3: press the keypad once;
Function: Cancel selection.

Two finger roller

Two finger scroll

Action 4: Slide your fingers up or down;
Function: Scroll web page or split screen file up / down or scroll

Two-finger zoom

Two Finger Zoom

Action 5: Two fingers slide to zoom in or out.
Function: can only be used on the websites.

Slide three fingers up

Three Fingers Swipe Up

Action 6: Swipe up;
Function: Switch between main interface and previous program or page.

Slide three fingers down

Slide three fingers down

Action 7: Swipe down;
Function: Switch between main interface and split screen.

Shift + Cursor

Function: Select text

Move the cursor to the bottom of the screen

Cursor to Bottom Screen

Function: Access the dock to change

Move the cursor to the top corner

Cursor to Upper Corner

Function: Enter the control center

INSTALLATION AND REMOVAL

Installation

Installation

  1. Line up the bottom edge of the iPad with the keyboard case.
  2. Push iPad lightly until all edges are aligned.
  3. Press the top corner of the iPad with your fingers to snap it into place.
  4. Repeat pressing down on the remaining corners until the iPad is firmly held inside the case.
Suppression

Suppression

  1. Hold the iPad on both sides of the top corner and use your thumbs to gently push the back cover back. It is held in place by two tabs.
  2. Repeat for the second upper corner.
  3. Completely peel off the upper part.
  4. Pull up to remove the iPad from the case.

ROTATION

rotation

USE

Use

LOADING

Charge

  1. Turn on the keyboard (if the battery indicator light flashes, please charge the keyboard).
  2. Plug the charging cable (included) into the keyboard and the power adapter (not included, iPad or iPhone power adapter recommended);
    1. The battery indicator turns red when the keyboard is charging;
    2. The battery indicator turns blue when charging is complete.

REPAIR

If the keyboard does not work properly, please check the following:

  1. The Bluetooth function on the iPad (or other Bluetooth devices) is turned on;
  2. The Bluetooth keyboard is within 33 feet;
  3. The Bluetooth keyboard is charged;
  4. Make sure the keypad is on (battery indicator is on);
  5. Press the “Pair” button and check the Bluetooth status;
  6. Make sure a keyboard has already been paired via Bluetooth.

If you have automatic correction or unwanted punctuation, please follow these steps:

  1. Open the Settings app> General> Keyboard> Hardware keyboard;
  2. Turn off automatic capitalization, automatic correction, and “.” shortcut (please refer to the picture below).

Autocorrect

If the Bluetooth pairing fails, please try the following steps:

  1. Remove all Bluetooth devices from your iPad;
  2. Turn off the Bluetooth function on your iPad;
  3. Restart the iPad;
  4. Activate Bluetooth on your iPad;
  5. Switch the keyboard off and on again;
  6. Repeat the steps on pages 2 and 3 to pair the keypad.

PRODUCT FEATURES

  • Operating distance: 10 meters (33 feet)
  • Modulation system: GFSK
  • Working flight: 3.0-4.2V
  • Working current: 0.88-3.85mA
  • Sleep current: <125µA
  • Charging current: 500-S00mA
  • Continuous working time without backlight: 60 hours
  • Loading time: <2 heures
  • Cargo theft: 5V
  • Key life: > 5 million shots
  • Operating temperature: -10 ±55°C
  • Maintenance: Please keep the keyboard at normal temperature and charge under normal volume.

COMPLIANCE and LEGAL PAGES

REMARK: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on again, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or move the antenna;
  • Increase the separation between the equipment and the receiver;
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
  • Consult the dealer or an experienced radio / TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

TYPECASE Logo

Documents / Downloads

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.