JatimNetwork.com – This is the cause and how to overcome the temperature indicator light on the Vario motorbike turning red or also called overheat.
The temperature indicator light that turns red indicates that the engine temperature is overheated or too hot.
The temperature indicator on most automatic motorbikes, including the Vario, is a picture of two waves accompanied by a flag like the shape of a boat.
Also Read: Viral Actions Car Drivers Do This When Motorists Pass in Traffic in Traffic, Netizens: Simple But…
What if the temperature indicator light does not turn off automatically? The following explanation is reported JatimNetwork.com from Youtube Kikik Rezkyotomotif.
Some of the causes of the temperature indicator light on, especially on the Vario, are as follows:
1. Leaking Waterpump
2. Late addition of radiator water
3. There is a blockage in the connecting hose between the reservoir and the engine radiator
4. Faulty radiator cap
Also Read: 5 Characteristics of a Damaged Motorcycle Spark Plug, Replace Immediately So The Engine Doesn’t Get Damaged!
The maximum temperature limit on Vario motorbikes is usually around 100 degrees, if it is exceeded then the motor will die or strike.
If it often crashes or suddenly dies, it will affect the quality of the engine so that it quickly gets damaged.
After knowing the cause, the first step that can be taken is to check the condition of the coolen motor or the radioator water reservoir. Is the radiator water still there or has it reached the minimum limit.
Also Read: 5 Motor Sport Recommendations for the 2023 Eid Homecoming Safely and Comfortably to Their Destination!
Specifically for the Vario 150, to add radiator water, you need to remove the coolen cover first.
Don’t forget to check the bottom of the motorbike for water seepage, that way you can know that there might be an engine leak.
