SHANGHAI, June 30 / PRNewswire / – Solar supply projects require 500Wp and more, so it is obvious that there is definitely a need for more powerful solar panels. In the area of research and development, the industry is working on ways to improve energy performance and module efficiency. The 500Wp currently offer only a modest scaling boost compared to 450Wp. In response, JinkoSolar recently launched the Tiger Pro series, which offers up to 580Wp in the 78-cell and 535Wp in the 72-cell version, 20% more power than the 450Wp panel and 15% more than 500Wp.
In comparison, Tiger Pro demonstrated the scalability of a record high-performance panel with up to 580Wp. This was achieved by improving the tiling ribbon and busbar process. Tiling Ribbon could play a role in increasing the power capacity beyond 500Wp. Compared to the traditional connection method, the Tiling Ribbon process has a seamless weld and a much larger effective interior, resulting in more power and drive current. The rather round band used is very good, since the cross-section is quite small, and has an advantage in that it directs more bound light back into the cells.
The module size of the 72-cell version of the Tiger Pro comes pretty close to other 500Wp + alternatives and fits the existing packaging requirements exactly, but they have an L129cke of 10-20 watts in power output. Users can see that there is a big difference in power density and performance. In addition, the 500Wp + module has some restrictions on the number of panels used in a string as the open voltage cannot be reduced. JinkoSolar has made an innovation to reduce the open voltage in the Tiger Pro to up to 49.5 Voc.
If you either stay with Tiger or switch to Tiger Pro, you can get greater benefits over other options available due to their higher performance, scalability, adequate coverage, and better features.
Questions & contact:
Tracy Wang
tracy1.wang@jinkosolar.com
+ 86-15618508853
– .
