Agriculture needs two things to thrive. Light, which comes from the sun and water, which you can take either from the well or from the running water system. All crops need an irrigation system, as you cannot rely on rainfall alone. Thus, with that system, water the plants whenever needed. Whether it’s a large garden in the countryside or a garden behind the house in an urban environment, there is still a considerable amount of water that needs to be given to the plants. The most efficient method is to access an underground water source, from where you can then extract it to use for irrigation.
An irrigation system must be continuously supplied with water during use. To do this you need certain devices to pump water to the system. In this article you will learn what those devices are and how important they are to make work more efficient.
This device is a safe solution with which you can take water directly from underground sources. It is the most popular among pumping machines due to its efficiency. It is very useful for rural households that do not have a running water system, but also for agriculture and irrigation.
The process a hydrophore follows has two parts. The first time, it extracts the water from the underground source, then transmits it to the consumption points. From those points, water is taken by a pump and added to a tank from where it is circulated to supply the system. The advantage of a hydrophore is that it does all the work, you just have to provide it with pipes for the water to pass through. The device has the option for the user to manually control the water pressure. Also, its positioning is very important. It must be installed near the water source, but never inside the home, as it produces an uncomfortable noise.
There are two types of hydrophore used in households: the surface one and the deep one. The surface one is used for a maximum depth of 8-9 meters, so it has a less powerful motor and consumes less electricity. The depth model or ejector pump is used for depths up to 25 meters. There is also a type of device that can pump water from a depth greater than 25 meters, but for domestic or agricultural use this is not necessary.
Before you buy the device, you should pay attention to the following aspects. The capacity of the expansion vessel must cover your needs. Analyze the actions for which you need the device and thus you will know which electrical power and maximum pressure you must choose.
2. Water motor pump
This device is a little simpler and often comes to the aid of the hydrophore to form a complete system. It’s basically a pump with a smaller tank that pushes water from one place to another. For example, it keeps a constant water level and pressure in an irrigation system. This motor pump is used by firefighters, being very useful in emergency situations.
The machine creates pressure to pump water from one location to another. All the action is moderated by a control system that ensures that the flow is according to the needs and the device works under normal conditions. The pressure with which the water is transported can be controlled by the user, and the devices are divided according to the need regarding this aspect. Some types have a higher pressure value and some lower. The motor pump is very useful when the water does not need to be extracted, but only taken over.
These two devices are essential for households without running water. And for agriculture they are a standard. No experience required to use or purchase. Just remember that they make noise and you should have a special place to install them.
The post The most efficient water pumping devices appeared first on casamea.ro.
