–
Rocking front gear motor can occur due to several possibilities. For that, the front gear needs special attention and regular maintenance.
This is so that the condition of your front gear remains in good condition and performance. The front gear or the front gear functions as a chain drive to the rear gear and rear wheels.
The size of the front gear is usually smaller than the rear gear. The hidden location and closed gear cover, making the gear often escape the supervision and attention of motor owners.
Long-term use and not smearing with chain lubricant can cause the front gear to rock and wear.
Baca Juga : Gear Belakang Motor, Jangan Sembarangan Mengganti Ukurannya
As a result, if the front gear is worn or rocking but you don’t immediately replace it, it will cause the motor chain to come off. Replacing components on a motor vehicle is important. This will keep the component’s performance functioning properly.
The cause of the motorbike’s front gear which often escapes the attention of motorists
The closed position of the front gear makes it difficult to check. The cause of rocking front gear generally occurs due to too much dirt stuck to it. So that dirt that has accumulated in the long run will cause these components to not function properly.
The front gear is a package that is interconnected with the rear gear and chain. A package containing these three components has the same function as the rear wheel drive. If one of these components is damaged, then the motor cannot run.
Duration of use is not the only reason the front gear of the motor is rocking. But you can find other causes from the sound that arises from the gear itself.
Baca Juga : Komponen Roda Belakang Sepeda Motor, Kenali Bagian dan Fungsinya
When the gear is noisy, you should take immediate action before a more serious problem occurs. Here are some habits that cause the front gear of a motor to shake:
Sudden Braking and Step on the Gas Directly
Often does sudden braking, which greatly affects the condition of the front gear of the motorbike. Habits like this usually often occur on roads where speed bumps are too close. After that, immediately drove again at high speed.
This habit is one of the causes of the rocking front gear of the motorbike. If the front gear is rocking, it will wear out quickly. So it is necessary to change the gear so as not to interfere with vehicle performance.
Usage Too Rude
The reckless use of a motorbike triggers damage to a number of parts of the motor. Problems with the front gear can usually be detected by the sound of kretek-kretek. This could be due to the loose chain causing an uncomfortable sound when driving.
Baca Juga : Cara Menyetel Rantai Keteng yang Kendur pada Sepeda Motor
If you find an incident like this, you should stop and immediately check your vehicle. Because if you insist on driving a motorbike, bad things could happen. Because the loose chain will eventually break and get wrapped around the wheel.
Rarely Giving Lubricants
The cause of the front gear motor rocking which eventually causes noise is due to a lack of lubrication. The lubrication must also pay attention to the ideal timing. Do check first whether the gear is dry or not.
Dirty Gear Parts
Lubricating the gear must be done by cleaning that part. Because the dust that sticks and accumulates will interfere with the performance of the motor itself. In addition, dust will also cause the gear to shake, causing noise.
The noise occurs due to friction between the gear and the chain due to too much dust pile. If you let this, then the gear set will have a big chance of being damaged. If there is a big problem like that, the only way is to replace the gear with a new one.
Often inundated by Rain
Floods often flood your vehicle. Indirectly will damage motor components. If you don’t clean the remaining flood dirt immediately, it will cause rust. So that the gear will become dirty and dry out because the lubricant has been mixed with water and dirt.
You should immediately clean and lubricate the gear and chain. This is in addition to caring for motor components, as well as preventing the front gear of the motor from rocking due to accumulated dirt. (R10/HR-Online)
Editor: Adi Karyanto
–
