Home » Technology » Test and Open the Mi 10T Pro Sales Box Page all

Test and Open the Mi 10T Pro Sales Box Page all

KOMPAS.com – Fancy. That one word flashed through his mind KompasTekno when you first open the box cell phone flagship latest Xiaomi, Mi 10T Pro, especially the Cosmic Black color variant.

The back of the phone, which is made of polycarbonate, is covered in a glossy dark gray finish (glossy). At first glance, it does look like glass on most premium cellphones.

Because it is shiny, it is only natural that the cellphone shell covered with the Gorilla Glass 5 protector is a bit slippery when held for a long time, and not very friendly with fingerprint marks.

photo" data-photolink="http://tekno.kompas.com/image/2020/12/13/17110077/menjajal-dan-membuka-kotak-penjualan-mi-10t-pro?page=2" style="max-width: 100%;width:750px">KOMPAS.com/Bill Clinten Back view of Mi 10T Pro. The back material of this phone is polycarbonate plastic covered with a shiny touch like glass. In this section, there is a rectangular module that contains three rear cameras, consisting of a 108 MP main camera, a 13 MP ultrawide camera, and a 5 MP macro camera. There is also a sensor to support the autofocus (AF) performance which is equipped with a physical image stabilizer (OIS). –

In addition to the back, around the frame (frame) Mi 10T Pro carries an aluminum material that looks elegant, as if it adds a luxurious impression to it smartphone this Rp. 7 million.

Also read: The Mi 10T Pro cellphone didn’t get a signal, this is Xiaomi’s explanation

For users who are used to holding thin phones, such as the Oppo Reno4 F (7.5 mm), then they may have to adapt if they switch to the Mi 10T Pro. Because, this phone has a thickness of 9.3 mm.

Users should also be familiar with the phone’s prominent rear camera module.

The dimensions of the thickness of the module which consists of three cameras (108 MP + 13 MP + 5 MP) can be said to be annoying when users often put their cellphones with their back facing downwards.

However, when carried everyday, this 218 gram cellphone is still comfortable to hold because it is not that heavy, at least not as heavy as the Redmi Note 9 Pro which weighs 209 grams.

The screen is spacious and bright

In terms of screen, Mi 10T Pro is equipped with an IPS LCD panel measuring 6.67 inches with Full HD Plus resolution. The screen that has been coated with a Gorilla Glass 5 glass protector may not be as good as AMOLED, but it’s still relieved.

Because, around the screen is decorated with a fairly thin frame, and is equipped with a module punch hole which is located on the top left of the screen. This module loads the camera selfie 20 MP resolution.

photo" data-photolink="http://tekno.kompas.com/image/2020/12/13/17110077/menjajal-dan-membuka-kotak-penjualan-mi-10t-pro?page=3" style="max-width: 100%;width:750px">Mi 10T Pro front view.  This cellphone screen carries an IPS LCD with a diagonal of 6.67 inches, Full HD Plus resolution, and a refresh rate of 144 Hz.  The screen itself is covered with Gorilla Glass 5.On the upper left, there is a punch hole module that contains a 20 MP selfie camera.KOMPAS.com/Bill Clinten Mi 10T Pro front view. This cellphone screen carries an IPS LCD with a diagonal of 6.67 inches, Full HD Plus resolution, and a refresh rate of 144 Hz. The screen itself is covered with Gorilla Glass 5.On the upper left, there is a punch hole module that contains a 20 MP selfie camera.-

When used in the hot sun, the Mi 10T Pro screen is still comfortable to look at. This is because the cellphone panel has a brightness level of up to 500 nits (typical)/650 nits (peak).

Also read: Complete specifications and prices for the Xiaomi Mi 10T and Mi 10T Pro in Indonesia

Not only bright, this screen also feels fast thanks refresh rate carried, namely 144 Hz. Compared to Mi 10T Pro (60 Hz) or Mi 10 (90 Hz), navigation activities between menus or between applications on a cellphone feel faster and more comfortable.

Do not have headphone jack

Further discussing the frame, the Mi 10T Pro is not equipped with headphone jack 3.5 mm. Until, users are accustomed to wearing headset wired must use an adapter headphone jack 3.5mm to USB-C included in the sales box.

Instead of being accompanied by an audio hole like the Poco F2 Pro, the top of the frame of this phone is decorated with an IR module blaster for features remote control, the hole speaker, and the microphone hole.

photo" data-photolink="http://tekno.kompas.com/image/2020/12/13/17110077/menjajal-dan-membuka-kotak-penjualan-mi-10t-pro?page=4" style="max-width: 100%;width:750px">Mi 10T Pro when viewed from the bottom frame.  On this side there is a speaker hole, a microphone hole, a USB Type-C port, and a drawer that supports two nano-type SIM cards.  Unfortunately, the SIM card drawer does not support external memory cards, aka micro SD.KOMPAS.com/Bill Clinten Mi 10T Pro when viewed from the bottom frame. On this side there is a speaker hole, a microphone hole, a USB Type-C port, and a drawer that supports two nano-type SIM cards. Unfortunately, the SIM card drawer does not support external memory cards, aka micro SD.-

While at the bottom of the cellphone frame there is a hole speaker, microphone hole, port USB Type-C, as well as a drawer that supports two nano-type SIM cards. Unfortunately, this SIM card drawer does not support external memory cards, aka micro SD.

Switch to the right side frame, here are the volume adjustment buttons, as well as the buttons power integrated with the fingerprint scanner module (side-mounted fingerprint).

Unlike the right side, the left frame of the cellphone itself looks clean without any buttons or holes.

Also read: A Mi Fan Gives Whole Xiaomi Stores Worth IDR 1.4 Billion

A little offensive hardware, Mi 10T Pro powered chipset Snapdragon 865, 8 GB RAM and 256 GB internal memory. The battery has a capacity of 5,000 mAh, and supports fast charging 33 watt.

In terms of features, the cellphone is also equipped with WiFi 6 connectivity, NFC, and is already running the Android 10 operating system which is polished by the MIUI 12 interface.

So, what will users get when they buy the Mi 10T Pro?

Could softcase unique

photo" data-photolink="http://tekno.kompas.com/image/2020/12/13/17110077/menjajal-dan-membuka-kotak-penjualan-mi-10t-pro?page=5" style="max-width: 100%;width:750px">The contents of the sales box for Mi 10T Pro and the unit.  In addition to cell phones, buyers will get a 33 watt fast charger adapter, 3.5 mm audio jack to USB-C adapter, USB-C data cable, SIM ejector, manual, warranty card, and jelly softcase that can be used to protect cellphones from impact.  In addition to all that, users will also get a sheet containing welcome words and greetings delivered directly by the Country Director of Xiaomi Indonesia, Alvin Tse.

KOMPAS.com/Bill Clinten The contents of the sales box for Mi 10T Pro and the unit. In addition to cell phones, buyers will get a 33 watt fast charger adapter, 3.5 mm audio jack to USB-C adapter, USB-C data cable, SIM ejector, manual, warranty card, and jelly softcase that can be used to protect cellphones from impact. In addition to all that, users will also get a sheet containing welcome words and greetings delivered directly by the Country Director of Xiaomi Indonesia, Alvin Tse.

Apart from mobile units, buyers will also get an adapter fast charger 33 watt, adapter 3,5 mm audio jack to USB-C, kabel data USB-C, SIM ejector, manuals, warranty cards, as well jelly softcase (cellphone package) which can be used to protect the cellphone from collisions.

The design of the cellphone package accompanied by the distinctive “Xiaomi” logo is arguably different from softcase most phones come in the sales box.

Top softcase it actually has a distinctive slippery feel jelly softcase, but the bottom adopts a touch doff and feels a little harsher.

photo" data-photolink="http://tekno.kompas.com/image/2020/12/13/17110077/menjajal-dan-membuka-kotak-penjualan-mi-10t-pro?page=6" style="max-width: 100%;width:750px">The Mi 10T Pro has been fitted with a unique built-in jelly softcase.  The reason is, the top of the softcase actually has the typical slippery feel of a jelly softcase.  However, the bottom part has a matte touch and feels a little coarser. KOMPAS.com/Bill Clinten The Mi 10T Pro has been fitted with a unique built-in jelly softcase. The reason is, the top of the softcase actually has the typical slippery feel of a jelly softcase. However, the bottom part has a matte touch and feels a little coarser. –

In addition to all that, users will also get a sheet of gratitude delivered directly by the Country Director of Xiaomi Indonesia, Alvin Tse, complete with signatures and social media accounts.

So, curious to see the shape of the Mi 10T Pro from all sides? Taking pictures unboxing Mi 10T Pro can be seen in the photo gallery at the link following this.

– .

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.