/i/2006107862.png?f=meta "Solving the Energy Dashboard Bug with DSMR Reader via MQTT: Meter Readings vs Daily Readings")
With this update is a reported by me bug solved with the energy dashboard. If you fill the energy dashboard with DSMR reader via MQTT, it is best to do this with meter readings and not via the registered daily readings. If the DSMR reader is out for a while, then your daily readings are not correct, meter readings prevent this.
It is most advisable to not use the “total” and “daily” sources. The regular “reading” sensors provide the most stable source of data for Home Assistant to use. These MQTT values are part of the “Telegram: Split topic” MQTT values within DSMR Reader, so make sure to enable them. See https://www.home-assistant.io/integrations/dsmr_reader/
You could not assign the gas meter readings in the energy dashboard due to a missing device_class. There is daily consumption, but it is less convenient. I have set up the energy dashboard in the following way:
dsmr/reading/extra_device_delivered (gas meterstand)
dsmr/reading/electricity_delivered_1 & dsmr/reading/electricity_delivered_2
dsmr/reading/electricity_returned_1 & dsmr/reading/electricity_returned_2
[Reactie gewijzigd door tdn135 op 1 november 2023 21:17]
2023-11-01 20:10:13
#Home #Assistant #Core #2023.11.0
/nginx/o/2023/11/01/15691725t1h194e.jpg "Latest Statistical Data: Eurozone Inflation at 27-Month Low – ECB President Kazak Discusses Potential Rate Cuts and Economic Outlook")
:watermark(https://f.pmo.ee//logos/4132/d583334e07b643b158b745b655f05032.png,-2p,-2p,0,18,none)/nginx/o/2023/11/01/15690602t1h354b.jpg "Matthew Perry: Talented, Complex, and the Impact of his Addictions")