British Expert Identifies Possible Reasons for Death of Titan Submersible
A British expert has named two possible reasons for the tragic death of the Titan submersible. Former Royal Navy submarine captain Ryan Ramsey believes that a hatch failure or a design error could have led to the disaster. This information was reported by RIA Novosti, citing the SkyNews TV channel.
Ramsey explained that the first scenario involves the hatch with bolts breaking, which ultimately resulted in the destruction of the ship’s hull. The second scenario suggests that the bathyscaphe’s hull itself was designed with errors and, as a result, could not withstand the pressure.
The expert emphasized the importance of adhering to “generally accepted ways to build submersibles” and warned that ignoring these standards, as in the case of the Titan, poses significant risks.
Russian experts had previously suggested that the destruction of the hull was the most likely cause of the bathyscaphe’s demise. They stated that the body “collapsed” or was crushed. Fontanka, a Russian news outlet, reported on this development.
The wreckage of the bathyscaphe was discovered on June 22, just a few hundred meters away from the remains of the Titanic liner, which had been the objective of the Titan expedition. Unfortunately, all five individuals who were inside the bathyscaphe were declared dead.
The investigation into the incident is ongoing, and experts are working to determine the exact cause of the submersible’s death. The findings will be crucial in preventing similar tragedies in the future and ensuring the safety of future underwater expeditions.
Why does the British expert emphasize the importance of adhering to widely accepted standards when constructing submersibles
British Expert Identifies possible Reasons for Death of Titan Submersible
A renowned British expert has put forward two potential causes for the tragic demise of the Titan submersible. The former Royal Navy submarine captain, Ryan Ramsey, has speculated that a hatch failure or a design flaw might have contributed to the disaster. This revelation was reported by RIA Novosti, citing information from the SkyNews TV channel.
Ramsey explained that, in the first scenario, the submersible’s bolts holding the hatch may have failed, leading to the subsequent destruction of the ship’s hull. Alternatively, the second scenario proposes that errors in the design of the bathyscaphe’s hull itself made it unable to withstand the immense pressure at depths.
Emphasizing the significance of adhering to widely accepted standards when constructing submersibles, the expert cautioned against ignoring these guidelines as it could lead to grave risks, as exemplified by the case of the ill-fated Titan.
Previously, Russian experts had also suggested that the destruction of the hull was likely responsible for the bathyscaphe’s demise, noting that the body had “collapsed” or been crushed. Fontanka, a Russian news outlet, has documented these findings.
The wreckage of the bathyscaphe was discovered on June 22, in close proximity to the remains of the Titanic, which had been the intended focus of the Titan expedition. Unfortunately, the submersible’s five occupants were declared deceased.
The investigation into the incident is currently underway, with experts diligently working to ascertain the precise cause of the submersible’s demise. The results of this investigation will be paramount in preventing similar tragedies in the future and ensuring the safety of forthcoming underwater expeditions.
This article raises an important discussion about the potential causes behind the death of the Titan Submersible. Whether it was a result of hatch failure or a design error, it is crucial to investigate thoroughly in order to prevent future incidents and ensure the safety of submersible exploration missions.