Home » Technology » “New DJI Matrice 350 RTK Industrial Drone with 4 Camera Systems”

“New DJI Matrice 350 RTK Industrial Drone with 4 Camera Systems”

To the brand’s drone portfolio DJI got a novelty in the form of a model Matrice 350 RTK. It replaces the 300 RTK model and brings several minor changes. DJI alone supplies up to 4 different camera systems for it and is aiming for the industrial sphere. So it is definitely not a drone for recreational flying. When folded, it measures 43×42×43 cm, unfolded 81×67×43 cm. It weighs 3.77 kg without batteries, with two TB65 batteries the weight increases to 6.47 kg, while the maximum take-off weight is 9.2 kg (it can carry more than 2.7 kg of load). The drone can fly at speeds of up to 23 m/s (83 km/h) and can handle winds of up to 12 m/s (43 km/h). With the basic 2110 propellers, it can fly to an altitude of 5000 meters at a take-off weight of up to 7.4 kg. With silent propellers to higher altitudes (model 2112) it can reach up to 7000 meters, the maximum take-off weight is 7.2 kg.

While the predecessor had IP45 resistance, the new one has IP55, which means quite decent resistance. It is therefore largely dustproof and is also resistant to jets of water. He shouldn’t mind a good break in the clouds, but he can’t handle immersion in water. It uses GPS, GLONASS, BeiDou and Galileo positioning systems. The TB65 smart batteries have a capacity of 5880 mAh and at a voltage of 44.76 V will consume 263.2 Wh of energy. It weighs 1.35 kg, so the entire battery has an energy density of 195 Wh/kg. It should last up to 55 minutes of flight. Its life has increased to 400 charge cycles to maintain 90% of the original capacity during the first year. The charging station can handle 8 TB65 and four WB37 batteries. It measures 58×35.8×25.4 cm, weighs 8.98 kg and can consume up to 1070 W.

The 350 RTK matrix has an LED light up to a distance of 5 meters and an infrared positioning system. Its FPV camera handles Full HD 1080p resolution at 30 fps, the angle of view is 142°. It can be the main camera Zenmuse H20 with a small 1/1.7″ CMOS chip with 20MPx resolution. It has a 17.5x zoom lens in front of it in a calculated range of 31.7 to 556.2 mm (66.6° to 4°) and an aperture of F1, 6. It can handle UHD 4K video (3840×2160 pixels) at 30 fps at maximum. It supports JPEG for photos. H20 also has a wide-angle camera with 1/2.3″ CMOS chip with 12 MPx, 24mm lens after conversion (82.9° angle shot) and aperture F2.8. Here it ends at Full HD 1080p30 video. The H20T is the version with a thermal camera.

Matrice 350 RTK

Another option is Zenmuse H20N. Here, a 4MPx 1/1.8″ CMOS sensor found its place behind the same lens. Due to the smaller diagonal, however, the calculated range shifts to 32.7 to 574.5 mm. The maximum video is 2688×1512 pixels at 30 fps. Its wide-angle camera has 2MPx chip type 1/2.7″ CMOS. It has a 29mm lens after conversion, (73.6° angle of view), F2.8 aperture and can record 1080p30 video. There is also a tele infrared camera with a 12.5° angle of view and a resolution of 640×512 pixels at 30 fps.

Zenmuse P1 on the other hand, it delivers a full frame sensor (35.9×24 mm) with a resolution of 45 MPx. Here you can get up to 4K video up to 60 fps. It can be used, for example, with the DJI DL 24mm F2.8, DL 35mm F2.8 or DL ​​50mm F2.8 lenses. Zenmuse L1 then it combines the classic RGB solution using a 1″ 20MPx sensor (max. 4K30p) with a 24mm lens after conversion and a lidar. It has an accuracy of 3 cm at a distance of 100 meters. The price of the drone should start at 290,000 CZK with VAT, one battery then costs CZK 25,000.Cameras cost between CZK 110,000 and 310,000.

2023-05-27 18:11:46
#DJI #Matrice #RTK #industrial #drone #stay #air #minutes

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.