“Motorcycle CDI Lifespan: Tips for Longevity and Maintenance”

The lifespan of a more durable motorcycle CDI is influenced by several things. Motorcycle CDI components can actually have a long life. But if the vehicle owner can take care of this motorbike’s CDI properly.

CDI is one of the important components in the motorcycle ignition system. Its function must be able to work properly so that the vehicle can start.

Every motorist needs to know the condition of the ignition system on his vehicle. This is to prevent damage and long-lived CDI components.

Motorcycle CDI lifespan is longer, here’s the treatment

CDI is one of the important components found in the vehicle ignition system. Its main function is to produce a high voltage that triggers the spark plug. So that the engine will run smoothly.

Given the important function of CDI, it is appropriate to carry out CDI maintenance optimally. Motorcycle performance can remain in good condition and comfortable for you to use.

CDI is included as the heart of a motor so it can turn on. But along with its useful life, the condition of the CDI can also decrease. When the CDI appears to be getting weaker, visible effects and symptoms appear.

Read Also: Causes of Burnt Vario CDI and Proper Solutions

The same goes for other electronic components. This motor component also has a service life or age limit. This is due to several factors that can affect performance and also its age.

The proper way to care for CDI so that it remains long-lived, is as follows.

Do Not Install In Wrong Position

If you want the age of the motor CDI to function properly and not easily damaged. All you have to do is ensure that the CDI is installed in the correct position.

Incorrect installation of the CDI, e.g. near a machine or in an area prone to water exposure. Of course, this component will easily experience a short circuit until it becomes damaged.

Check Ignition Components

To care for the next age of CDI, namely by carrying out routine checks. Especially the components that are closely related to the ignition path.

If you check regularly, then when damage occurs it can be detected immediately. You juag can handle it immediately.

Cleaning spark plugs

Caring for the CDI can also be done by cleaning several other components. But that is still closely related to the performance of the CDI. One of them is by cleaning the spark plug components.

Checking Cables

Check the cable section, make sure the type of cables that have high voltage. Apart from that, you can also take care of it so that the ignition system will function optimally.

Read Also: How to Fix Dead CDI, Adjust to the Cause

The life of the Motor CDI is Longer If You Clean the Rotor

The rotor and distributor cap are components on a motorbike that you need to maintain. You need to do this one step to make the ignition system performance optimal.

Weak CDI sign

There are various symptoms that appear when the CDI has started to weaken. One of them is that the electric voltage from the CDI results becomes unstable.

This unstable voltage can occur due to the motor battery not being able to conduct electricity optimally. But you do not immediately make a replacement.

So it does not rule out the work of the CDI getting heavier. It even makes the voltage unstable.

Not only that, other symptoms that arise if the age of the motorbike’s CDI starts to break down, namely the motorbike suddenly turns off. In addition, there is also no electricity coming out. Usually the dead CDI occurs due to the components in the CDI burning and unable to conduct electricity.

However, if the motor suddenly turns off while driving, then it cannot convict that there is a problem with the CDI. You can first check on a few other things before buying a new CDI.

Also Read: Due to Damaged Motorcycle CDI, Motor Turns Off Suddenly and Hard to Start!

The other thing you need to do is first check the electrical part that is connected to the CDI. One of the things you need to check is the CDI pulser part and the spool associated with the CDI component.

If it turns out that the two parts still have voltage, it means that the two parts are still good and you can use them.

But if the part is not there is a voltage, then both are damaged. It doesn’t even rule out the CDI component still in prime condition.

In order to maintain the age of the motorbike CDI, there are several things that can be done. We recommend that you pay attention to the maintenance of these components on a regular basis. (R10/HR-Online)