Hello DIYers~
I have heard that SilverStone’s cooling products have always won the competition with quality and excellent performance. Recently, I had the opportunity to apply for the experience of SilverStone Hydrogon D120 ARGB. Let’s experience this new product and share my feelings!
Product Features and Specifications
feature of product :
①Double-tower CPU cooler, equipped with dual fans and six pure copper heat pipes to ensure the best heat dissipation performance.
②The offset heat sink design can prevent the CPU heat sink from interfering with the memory on the LGA 1200-pin motherboard.
③120mm PWM fan with nine blades and a speed of 0~1850 RPM.
④Each fan is equipped with 8 pieces of ARGB LED, controlled by ARGB controller or supported motherboard.
⑤ Equipped with anti-vibration rubber pads to reduce noise.
⑥A long screwdriver is attached, and the spring screw installation design can be directly and firmly installed on Intel and AMD platforms.
Specification Table :
Hydrogon D120 ARGB unboxing preview
▼A list of Hydrogon D120 ARGB front printed boxes.
SilverStone’s main visual has a consistent blue and white color scheme, with a schematic diagram of lighting effects in the middle.
The print below supports the lighting effects of various board factories, and supports the new generation of LGA1700 sockets for INTEL. The original factory has provided dual 120mm fans and six pure copper heat pipes to provide excellent thermal conductivity.
▼Hydrogon D120 ARGB, printed information on the back of the box.
▼A list of Hydrogon D120 ARGB box contents.
▼This close-up close-up shows that the fins are quite solid.
▼Appreciate the domineering silver material used for the fins on the main body. The fan has been pre-installed before leaving the factory, which saves precious time and is very considerate.
▼ Hydrogon D120 ARGB fan body.
▼There are SilverStone Mark LOGO in every detail.
▼In all fairness, SilverStone’s snowflake logo is indeed quite textured as a finishing touch.
▼The instruction manual attached to the box indicates that there are two installation methods of INTEL and AMD.
▼I installed it on the AMD platform this time, so of course I have to refer to the instructions here.
▼Use the torture device! No, it is the upper buckle. Combine the corresponding screws and anti-shock rubber pads to fix the special backplane for AMD feet.
▼The fan and heat dissipation fins leave a gap in the blue circle in the picture, which is convenient for the attached screwdriver to lock and fix.
▼Painless installation, the heatsink can be easily installed at once, thanks to the design of precise offset cooling fins: it can effectively avoid the interference of the CPU heatsink on the memory on the motherboard, because my graphics card uses a vertical The device still has a little bit of play which is acceptable.
▼ Say goodbye to the old AMD original radiator.
▼Cover the case, the height of the radiator is 15.3cm and it will not interfere with the memory and the case.
▼Be lazy and provide various angle lighting effects on the official website for your reference.
Experience summary:
This time I had the opportunity to experience SilverStone’s latest ARGB fan six-pipe CPU cooler. During the actual installation process, I found it quite easy to install and very friendly to the people. This time the HYD120-ARGB radiator is equipped with two ARGB fans, the performance of noise suppression is quite good, and it will not feel very noisy during use. Here is a summary of the main features of the original factory and some features that I personally like:
①Excellent heat dissipation: With dual 120mm fans and six pure copper heat pipes, it provides excellent heat conduction capability.
②Precise design: Offset cooling fin design can prevent the CPU cooler from interfering with the memory on the LGA 115x / 1200 pin motherboard.
③Excellent fan: HYD120-ARGB’s PWM fan can control the speed range from 0 to 1850 RPM, and provide corresponding performance according to needs. It ensures maximum cooling performance while minimizing noise.
④Vivid ARGB lighting effects: adjust and synchronize your favorite colorful lighting effects arbitrarily through the ARGB controller or ASUS, GIGABYTE, MSI, ASROCK, BIOSTAR motherboards with 5V ARGB connector support
Stable and easy to install.
The price of this model is about 1,200 yuan, which is considered a cooling option with a high CP value. The above unboxing experience provides players who have recently upgraded and replaced cooling fans as a reference for purchase.
Thanks for watching.
