You have to learn how to read the correct and correct car oil dipstick, because it will allow you to know how the condition of the oil is.
Because currently car manufacturers have made it easier for users to check the condition of the oil with this tool.
Well, the oil dipstick itself is a tool with a circular head and a long thin iron plate. Its existence actually already exists from the manufacturer itself, but if it is damaged, you can buy it.
Also Read: Signs of insufficient car oil, don’t take it lightly because the engine can be damaged
How to Read an Easy and Simple Car Oil Dipstick
To be able to check how the quality of car oil is, now it will be very easy because you already have a special tool. The longer we use it, the quality of the oil will also decrease, so it is important to check it.
In the past, we had to go to a repair shop to check, but now there are tools that can help to check how the quality of the oil is.
But unfortunately not everyone knows and understands how to use these tools.
Because checking the oil is something you must do, you also have to know how to use the tool. Well, here are some easy tricks that you can do right away.
Also Read: Oil Viscosity for Old Cars Apparently Affects Engine Performance
Park the Car
Before you know how to read a car’s oil dipstick, you must park your vehicle on a flat surface.
This is so that when reading the oil with this tool it can be more accurate and don’t let the condition of the car tilt.
Don’t Start the Machine
When checking the oil, make sure that the vehicle’s engine is off, because engine temperature can affect checking.
But make sure that when you check the car it’s a good idea to have the engine hot.
Open the Hood
On the edge of the driver’s door, there will be a section that can open the hood of the car. So you can immediately pull then push the bars and get out of the car.
After the hood is open, you can immediately remove the oil checking tool so you can use it later.
Also Read: Car Oil Filter, Know the Function and Ideal Time to Change
Watch How Level Indicator
Usually there will be two small dots on the end of this tool one indicating full oil and the other indicating minimal amount.
Meanwhile, to read it is by ensuring the minimum point that should be near the end of the maximum point.
Usually about an inch or so higher. For a car that has a sufficient amount of oil, the line will be around the middle of the two points.
If the point is at a minimum, it will be at the very end of the tool. If the line is from the oil mark on the tool and is halfway between the tip and that point, it means you need to add more oil.
Once you know how to read a car oil dipstick, now you don’t have to bother taking it to a repair shop anymore. Because you can only use the oil measuring tool. (R10/HR-Online)
–
