How to patch a torn tubeless tire is not difficult, you can even do it yourself using makeshift tools.
But if you can’t do it, the only way is to take it to the nearest repair shop.
Patching this tubeless tire will also not damage the tire, because the mechanic will only insert the tire patch tool with kit and glue.
But doing a tire patch yourself can help you in an emergency. But how?
How to Patch a Torn Tubeless Tire Easily and Simple
Like the initial wetting, to patch a tubeless tire is not difficult, even you can do it yourself. It’s just that you have to need some special equipment before doing it all.
One of the tools is a tire repair kit that you can buy at various stores at a fairly affordable price. Now in the tire repair kit there will be some equipment to be able to patch tubeless tires.
Starting from the hole opener, rubber patch, hook to glue that you can use easily later. After all the tools are in place, it’s time for you to patch the tubeless tires yourself using the string method.
Also Read: Causes of Tubeless Tires Leaking and Often Flat
Know the Leaking Point and Clean the Tires
This method of patching a torn tubeless tire using the string method is suitable for dealing with common leaks in the crown area. So for the first step before patching then you must know the location of the leak point.
If you have found it, now you can immediately clean the hole using a cleaning hook. This is to ensure that the hole is completely clean from adhering dirt.
Insert Rubber
The next step is to use a rubber patch, just take one that is elongated. After that, just insert the rubber all the way to the center towards the hole in the hook tool.
Also Read: Causes of Bumped Tubeless Tires Due to Lack of Air Pressure
Puncture to the Point of Leak
How to patch a torn tubeless tire when inserting the rubber patch can be directly stabbed to the point of the leak. You can use the help of a hook that has been inserted by rubber and glue.
Then press until half of the rubber is completely in the tire, but not all of the rubber goes into the tire. If you have immediately pulled the hook and just leave the rubber patch on the tire.
Finally, cut the end of the dangling rubber to make it look neater. When it’s finished, don’t be happy just yet, you should check it by filling the air to the appropriate pressure.
Check for leaks using soapy water, if there is no indication of a leak, that is a sign that it is safe and the tires are not leaking or tearing again.
You need to know, that how to patch a torn tubeless tire using this string method you only do in an emergency. (R10/HR-Online)
–
