How to deal with leaking car axle oil is important you know. The reason is that the leaking car axle oil can be seen from the oil drop, so you need to know how to deal with it. Especially if you have an old car, you need to know the right steps for car maintenance.
Not only that, but the oil that has penetrated indicates that there are some problems with your car. If so, then you need to know what causes the steps to deal with it properly.
Read also: Oil for car axles, has a limit of use up to 40,000 km
How to deal with car axle oil leak you need to know
More cars Rear-wheel Drive o RWD relied on the axle to channel engine power to the wheels. Basically the mechanism of this axis will be driven by components called gears and cogs.
That is why lubrication plays a very important role in maintaining performance so that there is no excessive friction.
Unfortunately, this component often has problems that are sometimes considered quite trivial, namely when the axle oil has leaked.
If the axle oil has leaked or is infiltrated, the lubrication of the gears and gears will be interrupted. Meanwhile, the reason the axle oil is leaking is the oil tap bolt arena which is not tight enough.
Not only that, but improper installation of the bolts until the oil seal is brittle may be the next cause. If so, then you as a car owner need to deal with it immediately so that it returns to normal.
Read also: The effect of most car engine oil reduces performance
Check the bolts, then tighten
The way to deal with the car axle oil leak for the first pass is to check the condition of the bolts. The reason is that loose bolts often occur in different types of vehicles with high flight hours.
If the bolt is loose, you just need to tighten it and make sure it is installed correctly.
While the slanted bolts will make the car heavier and potentially damage the crankcase thread and bolt.
Also, if you have used the bolt for a long time, it can loosen or loosen quickly, causing oil to seep in. Use the help of a wrench to tighten the bolts to facilitate application.
However, if the bolt is damaged, the step you need to take is to replace it with a new one. You can make new threads or use other bolts which are still good.
Using iron glue or sealant
The next way to deal with car axle oil leaks is to use iron glue or sealing glue. Hence the way you can do is apply this glue to the leaking area first.
But you have to be even more careful not to get glue on the skin. This is because the nature of iron glue is very sticky, so it can cause a burning sensation when it hits the skin.
Additionally, you can also use sealing glue to treat runny oil without having to disassemble it. Because this glue is also apparently capable of blocking the engine valves and preventing oil from seeping in.
Now the way you can do this is also very simple, just simply wrap the entire thread onto the bolt with masking tape. So that the leaking axle oil can be fixed properly with the help of glue.
Read also: Functions of the oil in addition to engine lubricants, maintaining the life of the vehicle engine
Replace damaged seals or worn seals
You can also take care of the car axle oil leak by replacing a damaged gasket and a worn gasket. As we know, the car has several components besides the axle.
Each fitting of different section will also have a gasket to keep the presence of oil. If other bad things have happened, the damaged gasket or worn gasket must be replaced immediately.
So what if you can do it from home to overcome this olli? Sure I can! Also, if you like the automotive world a lot, the possibility of overcoming this problem is relatively easy.
However, if you are a beginner and still have a hard time managing it, then this is quite reasonable. Remembering that not all owners of four-wheeled vehicles are automobile experts.
If you are a beginner and can’t solve problems like this, you can take it to a workshop.
Because how to deal with leaking car axle oil will be very simple with the help of a reliable technician. (R10 / HR-Online)
–
