“How to Open a Locked Car Door: Clever Techniques for Conventional and Keyless Systems”

Automotive News

How to Open a Locked Car Door – Opening a locked car door from the inside requires a special trick so as not to damage the door or other car parts such as the key housing. This incident can actually occur not only because the key is left inside, but also because it forgot to put it.

To be able to open a locked car door from the inside, it is troublesome. This is because some techniques are often done only for emergencies, so the potential for damage will still exist.

When you realize that the car door is locked from the inside, it will certainly irritate the owners. However, the attitude needed when experiencing this incident is patient and not panic, even though it is difficult to live with.

In fact, there are several ways to open a locked car door from the inside. A few simple steps can be done, without the help of a locksmith taking over the job.

Currently, many cars use keyless and smart entry systems, so this case is somewhat more difficult to handle. Meanwhile, for vehicles that still use conventional key systems, aliases that still have keys and key housings, it will be easier.

Various Ways to Open Locked Car Doors

Below, Mobil123 will discuss several clever techniques for how to open a locked car door from the inside. Of course, the method that we present is quite easy to do yourself at home without involving the help of an expert.

Using a Tennis Ball

When you hear a tennis ball being used as a tool to open a car door it sounds quite strange. However, this tool is quite effective as a way to open a locked car door in a conventional lock system.

First, prepare the green tennis ball in question. Then the next step is to punch holes in the ball, using a sharp object such as a knife or screwdriver that has been heated.

The hole in the tennis ball functions as a pump to push pressurized air into the keyhole. Therefore, the hole does not need to be large, try to match the size of the hole in the key housing.

The trick is to align the holes in the ball with the keyholes and press as hard as you can. The resulting air thrust must be ensured to push the gaps in it, so that the door can open perfectly.

This step is not always smooth, in some cases it must be tried repeatedly until it is really successful. In essence, conventional lock systems contain mechanical components that can still be moved, as long as there is no rust.

Prying Out Middle Door Latch

The next way to open a locked car door, which can also be practiced in a conventional lock system, is to use the door latch. This technique is not only done on the front door, you can work around this with an easier door.

In general, this technique is used to open the doors of older Toyota Avanza and Xenia. The two twin cars still use a conventional lock system and have a latch system made of plastic.

The first step is to open the rear right door rubber seal. In the process, try not to fold the rubber because it can cause damage.

Once opened, take a peek at the gap between the glass and the vehicle body. Inside there will be iron attached to the plastic. It is located just below the lock latch button (door lock).

To open it, you will need a small piece of wire that is bent at the ends. This is useful as a hook and use used wire hangers that have better material.

This means that by using a better wire, it can minimize the incident of breaking when prying. The length of the wire for prying has a minimum length of 20 cm.

Then insert the wire through the sections mentioned above. Then slide the wire until it touches the hook lever used to open the car door.

The next step is to slowly lift the hook above. Never force to open the hook, because it is feared that it could damage the hook system which is made of plastic material.

When performing this technique, you need to use a soft feel to hear the click sound. With this sign and the lock lever has moved from its initial position, it means that the door is no longer locked.

One sign of the success of this technique is that the entire process can be carried out without using full force. So if you feel it in the process, then it is certain that the object you are pulling is not what is meant.

How to Open a Locked Car Door Using a Ruler

Opening a locked car door from the inside using a ruler is actually an old trick. This method usually relies on an iron ruler and still works on vehicles that have not implemented a keyless system.

Using an iron ruler is actually not really recommended because it can scratch the glass up to scratches or injure your hands. You also have to be careful when inserting the ruler so that you don’t catch the wires running through it.

The method used is actually quite simple, first you have to remove the rubber between the glass and the car body. The rubber, which is responsible for keeping the glass moving, is quite easy to open and reassemble.

The next step is to insert a ruler into the door slot approximately 60 cm to 80 cm. Slide and feel the movement on the lock panel, then press on the door handle.

Look for a rod in the gap that has room to move up and down like a spring when pressed. This part must be pressed while pulling the door handle.

This trick also requires a high level of patience because you have to be precise in the pressing process. If it doesn’t work, try a few more times and do it slowly. In general, a ruler made of iron that is used to push the rod which is also made of iron is a bit slippery.

Pumping Pillow Use Technique

This technique can be used for all types of cars, both still using conventional and keyless keys. This trick has been practiced by a car tow truck from Canada.

This skillful action was recorded and uploaded via the ViralHogs Youtube channel and received various reactions from netizens. With this fairly simple tool, many people were amazed because the method was quite easy.

He used an inflated pillow, then assisted with a specially designed stick to open a locked car door from the inside. The pillow is stuffed into the doorway, then pumped and finally the stick is inserted, to open the locked car door.

Using a String

This method is also one of the old techniques that many people often do and succeed. However, this method is absolutely only useful for older vehicles that still use a button lock pinti model and is located above the trim.

This type of technique obviously doesn’t work or is very difficult to apply to cars where the locking lever is in the middle of the door trim. You can try the methods described above.

As for using a piece of rope that is knotted, you can slowly insert the rope through the top corner of the door. Do it slowly until the knot goes into the lock button.

After entering the lock button, pull the rope from both directions slowly until it is perfectly tied. Then continue pulling the rope until the door lock opens and the handle can be pulled properly.

Using Masking Tape

This is also a fairly powerful way to overcome the problem mentioned above. Clear tape, which is usually used to glue two separate parts together, can also be used as a lifesaver.

This technique was dismantled by one of the Twitter account owners who had gone viral. By using a few pieces of masking tape, he can open the glass of a locked vehicle from the inside.

The trick is to stick several rows of masking tape from the top of the glass to the bottom. After it was enough, then the bottom of the tape was pulled and with the help of a friend.

This technique is quite effective for vehicles that still use keyless or conventional systems. But on vehicles that have used the system power windowthe motor may have damage because the glass is forced to open by pulling.

How to open a locked car door on a keyless system

Incidents of locked car doors from the inside are actually difficult to happen to vehicles that have used the system keyless or smart entry. Because by using the latest technology, consumers do not need to hold keys which are generally small in size.

Modern cars only rely on a box made of plastic which is useful for opening and lowering the door lock. The box is even enough to be placed in a trouser pocket, because the process of going in and out of the vehicle no longer uses a key.

Car owners only need to press a black button near the door handle to open and lock the door. Even in more sophisticated cars, the sensors contained in the box will immediately unlock when it is known to be approaching the vehicle.

There are also those who have used hand touch sensors that are used to open or lock car doors. All of this sophistication was created to make it easier for consumers to use a car.

Even recently, several car manufacturers have created applications that can replace the function of the car key remote box. So that car owners can enter and exit the vehicle by relying on their smartphones.

System keyless the simplest itself is said to not lock the door automatically while the lock box is still inside. However, this certainly increases the risk of being exploited by irresponsible parties.

Another weakness of a car that uses a keyless system, among others, is when the remote battery starts to run low. This condition will make it difficult for owners to enter and exit the vehicle.

Then after reading some of the tips on opening a locked car door from the inside above. So the anticipatory step is to prepare a tennis ball that has been perforated, a piece of rope, an iron ruler and wire. [Dew/Tutus]