–
Although not a repairman, but at least you have to know how to clean your own motorcycle carburetor. The reason is, the carburetor is one of the most important components in a motorcycle.
Especially now that we are still in the Covid-19 pandemic, as well as the implementation of the Emergency PPKM policy, which requires staying at home.
Baca Juga : Jenis Karburator Motor Berdasar Bentuk Venturi dan Katup Gas
Therefore there is no harm in trying to clean the carburettor of your own vehicle at home. In addition to saving on expenses for service costs, it also adds knowledge, and fills free time while staying at home.
Steps How to Clean a Motorcycle Carburetor
Why do we have to regularly clean the carburetor? Because this one component is the most important part of the vehicle.
One of the causes that make the engine brebet is that there is dirt on the carburetor. So, the dirt makes the combustion process disrupted.
But the problem is if we clean this one component by ourselves, is it difficult to do it? Not really.
To make it easier to clean your own motorcycle carburetor without having to go to a repair shop, here are the steps.
Remove the Carburetor
Before taking the first step, first prepare equipment such as screwdrivers, keys and so on.
When everything is ready, remove the carburetor from its place. Disassemble these components one by one, and don’t forget to memorize the parts. So that, when you reinstall it is not wrong or having trouble.
Open the Carburetor Bowl Then Clean
The next step how to clean a motorcycle carburetor is to open the bowl, and remove all the hook bolts.
Baca Juga : Penyebab Karburator Banjir, Kenali 6 Faktor yang Berpengaruh
Then, look at the bowl to see if there are deposits from the rest of the dirt or not. If there is, then clean it by using gasoline and a soft brush.
Removing the Jet Pilot Part
The next step is to remove the pilot jet, main jet, and another needle jet attached to the motor carburetor.
But when removing the part, do so with care. After that, to clean it you just blow on the hole. However, for maximum results, you can also use an air compressor.
In addition, do not forget to clean the carburetor body. The trick, by spraying the hole that has the muzzle. So, all the dirt and water that clogs will disappear.
Meanwhile, to clean the Needle jet, you can use a brush. But first, the brush is dipped in gasoline. After that, spray it into the hole using a compressor machine.
Clean the Sprayer
How to clean the next motor carburetor is on the nozzle. Components that are part of the carburetor are very important, and have an influence on engine performance. So, don’t let it be ignored by you.
However, when cleaning the sprayer, do it carefully. Because, do not let the diameter of the compressor nozzle change. The reason is, if it changes, it is likely that your motorcycle engine will not be able to turn on.
Meanwhile, to clean it is to use fine sandpaper, then don’t forget to also clean the dirt that sticks.
Put it back
The last step on how to clean a motorcycle carburetor is to reassemble it properly according to its original condition.
Baca Juga : Penyebab Karburator Motor Nembak, Suara Keluar dari Knalpot
Do not forget to adjust the fuel mixture, namely by adjusting the height of the gasoline float by using a caliper.
If everything has been done, then install or assemble all components on the existing mount on the motorcycle as before.
Clean Air Filter
Although not from the component parts of the carburetor, but the air filter can also affect the performance of the motor itself.
Before cleaning, you must first remove the air filter. While the material to clean it is to use a special liquid.
When finished, let it sit for some time until the cleaning fluid dries by itself.
You need to know, that all the ways to clean a motorcycle carburetor, if done by yourself, require a high degree of precision and patience. Like paying attention to each component or its position. (Adi/R5/HR-Online)
Editor: Adi Karyanto
–
