If you want to level up quickly, completing missions is the key
How to select and set a hunting ground for the level 45-50 section, which is the congested section
A good setting to have when auto-hunting
Currently, most users who play Pracia Electric are staying between level 45 and 50, where almost all content has been unlocked. In this section, the slow-rising experience points and the problem of farming new equipment at level 45 overlap, and you will feel a distinctly slower growth rate than before.
Therefore, it is a time when more efficient hunting is needed than ever. If so, I have summarized how to overcome the difficult times of level 45-50.
Check before hunting! If you want to level up quickly, clear the mission first
First of all, before hunting, you must clear the mission that you can proceed, the so-called blue quest (Parque). The amount of experience points that can be obtained as a reward for missions is considerable and the efficiency of experience points is higher than that of hunting, so if there are missions that can be progressed, it is recommended to complete them first.
It is not difficult to check the mission. If you move to the world map UI through ‘Menu-World Map’ (shortcut key M), the blue exclamation mark in the town is the current mission that can be performed.
However, the world map UI can display a lot of information at once, making it difficult to see missions. If so, you can use the legend at the top left. If you click the legend tab at the top left and activate the mission, you can check the mission that can be completed more easily.
Alternatively, if you press the available button on the right and move the world map, you can check the quests that can be performed in the town at once from the menu on the right.
When you complete the mission, you can get a lot of experience and gold as a reward. There is no daily limit on the number of quests, so if there is a mission that can be performed, it is better to proceed immediately.
From settings for efficient hunting to how to select a hunting spot!
From hunting grounds with the recommended level of 45 or higher, not only the attack power of monsters increases, but also monsters that attack first appear even without taking damage. Therefore, it is necessary to select an appropriate location and set it up so that it does not deviate from the designated spot, especially during automatic hunting.
■ Let’s check the stats and accuracy that are more important than the recommended level
Before hunting, you must first check your character’s hit stat. This is because no matter how high the attack power is, if the accuracy is insufficient, the monster cannot be hit.
After level 45, there is a recommended hit, the so-called hit cut. If you do not hit the recommended hit according to the level, it may be difficult to proceed with the content of the level. The recommended hit values for each level are ’45 level 160′ ’48 level 190′ ’51 level 210′ ’54 level 240′ ’56 level 280′.
If your character’s accuracy is insufficient, it is recommended to use methods such as memory recovery, vehicles, shapes, and equipment replacement to achieve the recommended accuracy.
■ A character who dies after auto-hunting? Set-up prevents you from leaving your seat
Combat-related settings are also important for efficient hunting. In particular, if you use assist mode, preventing the character from escaping from the designated location can help the character survive. Therefore, it is necessary to set the setting so that it does not leave the seat.
How to set it up is simple. First of all, after moving to the environment setting UI with ‘Menu-Preferences’ (shortcut key), reduce ‘Battle-Continuous Combat/Target-Continuous Combat Range’ to ’10m’.
In addition, it is recommended to set ‘Disabled’ under the setting tab to ‘Automatically use the destroyer’. Of course, you can get additional experience points when using the annihilator, but the time to hit the monster increases during that time, so the hunting retention decreases. If you think the extra experience is more important, it’s okay to use the annihilator.
Lastly, ‘Elite Monster’ in ‘Target Selection Priority’ is also changed to ‘Disabled’ to prevent the case where the character gets aggro from the elite monster and gets out of position.
■ Check the types of monsters around you and start hunting
After the recommended hits and settings are over, you need to set up a hunting ground and a seat. In the case of hunting grounds, if your settings are good or you want to level up quickly, you can use a hunting ground that is one level higher than your level.
For example, if you are level 46, you should go to the recommended level 45~47 hunting ground like ‘Echo Forest’, but if you have enough character settings such as hit, it is okay to go to the recommended level 48~50 ‘Stone Grave Post’.
☞ Reference article: A hunting ground to acquire ‘Lv45 rare equipment’, where should my character go?
As mentioned earlier, in hunting grounds with the recommended level of 45 or higher, monsters appear first, so you have to be careful. If you settle in a location with too many monsters, your hunting efficiency will decrease and in severe cases, your character may die. The most recommended position is one with 0-1 first attack monsters, 1-2 elite monsters, and no ranged monsters.
If there are too many first attack monsters and long range monsters, it is difficult to manage your stamina, and especially in the case of close range dealers, there is a high probability of leaving your seat while going to attack. Elite monsters can aim for rare rewards, but the investment cost, such as the time required to catch them, is higher than that of normal monsters, so you must adjust the number of elite monsters around you to suit your specifications.
If it is difficult to know which monsters exist because the nearby monster names are not displayed, apply ‘Monster Name Display’ of ‘Monster Name Tag Settings’ below to ‘Show All’ in ‘Preferences – Display – Name Tag’ do.
Perfect considering all this! Additional tips to know when hunting
■ Selecting a hunting ground considering the dismounting skill of the mount
It has a dismounting skill that inflicts damage when dismounting from a mount of a rare grade or higher.
If you proceed with the assist mode, the character will return to the seat designated as the mount after maintenance. If that happens, recovery potions will be consumed unnecessarily and you will have to go to the village more often for maintenance, which can reduce the efficiency of hunting.
■ Check the available hunting time in assist mode! 40 minutes recommended for maximum efficiency
If you use assist mode, you can check the available hunting time in the lower left corner. This is an estimated time that can be hunted without maintenance for that amount of time in the future. A too short estimated time means that the difficulty of the hunting ground is high compared to the character specifications. Conversely, if the expected time is too long, it means that the difficulty of the hunting ground is low compared to the character specification and the experience gained is small.
Therefore, it is better to select a hunting ground with an appropriate level of difficulty and use the assist mode. Usually, it is recommended to hunt in a place where the continuous hunting time is indicated as about 40 minutes, as it is more efficient.
■ The main skills are mainly set with power amplification rate spell stones
In Pracia Electric, you can strengthen a character’s skill by adding a spell stone. There are various types of spell stones, such as MP consumption reduction rate, power amplification rate, and cooldown reduction rate. An efficient way to use spell stones is to set your main skills to focus on power amplification rate spell stones.
Here, the main skill means the skill that is used most often and has a high deal expectation. If you are hunting in a hunting ground that fits your specs, MP is not lacking more than you think, so the MP consumption reduction rate spell stone is not good.
In addition, in the case of a spell stone with a cooldown reduction rate, there may be a case where the skill is used too often and MP is rather insufficient. Therefore, it is a good idea to set up a power amplification rate spell stone and use a high-grade power amplification rate spell stone if you can afford it.
