A young man has been using an air conditioner for a long time. One fine day, his hand touched the I Feel mode. It was cool and very satisfying. Plus, the air conditioner technician came to confirm. Really saves more electricity. I know this has been open for a long time.
The weather during this period in Thailand can be said to be extremely hot. With temperatures that almost exceed 40 degrees Celsius, it is necessary to stay in an air-conditioned room at all times. and turn on the air conditioner without fear of the electric bill. Recently, a young man went to discover the secrets of the universe when his hand suddenly hit the I Feel mode, making him realize that This mode is extremely cool and saves more electricity as well.
In this group Dear housework One young man said Normally when turning on the air conditioner He always turns on cool mode. Until one day my hand touched the I Feel mode and I felt that the air conditioner was very juicy. I’d like to know who uses this mode. And does it really save electricity?
In this regard, an air conditioner technician came to confirm that I Feel mode is the automatic mode in Mitsubishi air conditioners. The air conditioner will change to use a sensor on the remote. It is a measure of ambient temperature. and send a signal to the control unit in the air conditioner to analyze that In what mode will it work? And the air conditioner will analyze its operation from many factors. Both the heat inside the room Number of people in the room weather outside To adjust the room where the remote is is as cool as possible.
The operation of the air conditioner in this mode It will work alternating between working cycles in all modes. If you find that the temperature in the room is higher than what we set for cooling. The air conditioner will adjust to Cool mode immediately and when the temperature in the room is less than the coolness that we set. The air conditioner will send a signal to the compressor to work in Dry or Fan mode, switching continuously in this mode. Working in this mode This will cause the temperature in the room and humidity in the room to be related.
The advantage of working in this mode is that it will not consume too much power. Because everything has been calculated already. But it is necessary to place the remote near the people in that room. People sitting further away from the remote may feel hot.
Know how the air conditioner works What mode must I adjust the air conditioner to? To save electricity and get the juiciest air conditioner
Each air conditioner The work is divided into 4 main modes as follows.
1. Cool mode is considered the air conditioner mode that people use the most. Because if the temperature is set at what level? The machine will only adjust the air to the temperature. Cools the room slowly when it reaches the set temperature. The air conditioner will cut off work. The air conditioner in this mode will maintain a constant temperature in the room. But it will consume high electricity. If left open during hot weather The air conditioner will work hard to try to maintain the same temperature. As for how to turn on Cool mode to save electricity. Turn on the air conditioner in Cool mode first and then when the desired temperature is reached. Set it to Auto mode.
2. Auto mode: This mode is the easiest to use. The air conditioner will calculate the values on its own without us having to make any adjustments, including the temperature in the room, the fan, and the people in the room. outside weather and adjusted to get the most cooling effect This mode won’t consume a lot of power. It’s not complicated. Just press and use it. But if you turn on auto mode when you’re in the room alone It will consume electricity as well.
3. Fan mode or fan mode That is, the air conditioner has a function similar to a fan. No matter what the temperature in the room is, it has no effect. Because it only turns on the fan to let air pass through without cooling and without reducing the temperature in any way, suitable for eliminating musty odors. Food smell in the room Reduce humidity that accumulates in the room and reduce the problem of the air conditioner cooling slowly This mode can be turned on during cool weather. But if the weather is hot then turn on this mode. It will consume more power than before.
4. Dry mode: This mode will automatically reduce the humidity in the room. It works by sucking the humidity in the room into the air conditioner and releasing it through the sewer pipe. When this mode is turned on, there will not be any temperature numbers because the air conditioner will not cool. and has only a water drop symbol. This air conditioner mode consumes very low power. But it doesn’t only cool and keep the room at a normal temperature. And we should turn on the air conditioner in this mode once a week or 2 times a month.
