CVT motor matic vibrates for sure there will be a cause, but unfortunately many people don’t know what exactly these factors are.
As we know that scooters have many advantages, such as super smooth transitions.
This is because of the CVT transmission which will use centrifugal force to create an acceleration ratio without any lag.
However, it turns out that this type of motor does not always run smoothly and there may be vibrations.
Also Read: Motorcycle disc brakes fail, these are the causes and how to fix them!
CVT Motor Matic Vibrating Components, What’s the Solution?
CVT itself is one of the most important components in this type of motor matic. How not, this component is useful for channeling power from the engine to the rear wheels of the vehicle.
Like other components, CVT often has problems. These components usually vibrate when in use and can reduce the level of comfort during driving.
This vibrating part of the CVT occurs because the fat from the rear pulley has been scattered until it finally contaminates the double canvas housing. This happens because the rear pulley seal is brittle.
Also Read: AT vs CVT Transmission is Different in Components and How it Works
The Most Fundamental Cause
As before, the cause of the CVT motor matic vibrating is because the fat from the rear pulley has been scattered everywhere. Until finally it will contaminate the double canvas housing on the vehicle.
The reason is, the grease on the rear pulley is useful for lubricating the pin slide so that it can move more smoothly.
In addition, grease spills on the double-pad tread can cause slipping of the lining and vibration.
Furthermore, the age of the motor and the distance traveled can also be the cause of the CVT of your favorite motorbike vibrating.
Usually this vibration can appear when you are using it to travel long distances.
Also Read: Causes CVT to Heat Fast, Choose the Wrong Lubricants!
Tips for Overcoming Vibration
If the CVT motor matic vibrates, you should move quickly so that the condition does not get worse, for example taking it to a repairman.
You should replace the dented roller. Then you have to sand the roller path that has been scratched to make it smoother.
But if you can’t do it yourself, then one of the best ways and alternatives is to take it to a professional repairman.
Expert mechanics can clean the double lining that has been exposed to this grease spill. In addition, they can also replace the brittle pulley seals with new ones.
Even professional mechanics are able to check how the CVT condition of your motorbike is. For this case, usually the mechanic will clean the CVT directly.
This they will do to find the cause of the CVT motor matic vibrating, especially if the age of the vehicle is still quite young. In addition, the mechanic is able to see any other components that need replacement. (R10/HR-Online)
–
