Cooler Grasp TD500 MAX – Pre-installed ATX3.0 case with built-in 360 diploma thick water cooling, 850 watt energy provide, and two-section energy wire for simple set up

TD500 MAX is the primary case within the Cooler Grasp MAX sequence to undertake ATX specs like NCore 100 MAX and MR200P MAX, it has a built-in energy provide and built-in water cooling, making it simpler for players to make use of their computer systems to determine. As well as, this new TD500 MAX makes use of pre-installed motherboard and graphics card energy cords to attach growth cables after which motherboard energy provide and graphics card will be simply put in, simplifying are the steps to put in pc elements.

Let’s begin from the surface and take a more in-depth have a look at the options of this new ATX case from the MAX household.

Key options:

• The looks inherits the TD500 sequence chassis
• Comes pre-assembled with case, energy provide and radiator
• Putting in pc elements is simpler
• Excessive compatibility and efficiency
• A custom-made AIO cooling answer for the enduring Mobius sequence followers
• Patented two-stage energy wire connection
• Human screw storage design
• Scale back the issue of gathering computer systems and filling traces

Chassis look and primary specs

TD500 MAX inherits the looks of the TD500 Mesh V2 chassis and replaces it with the particular grey colour of the MAX sequence household The decrease entrance panel The silver Cooler Grasp brand offers slightly textured ornament to the decrease key entrance panel. The again of the case helps 7 units of growth slots, which may set up a set of 12 cm followers, and the ability provide part adopts a backside design.

The entrance panel adopts a slanted design and is situated on the junction of the entrance and high of the case. and TD500 MAX additionally has a microphone interface With one button, you possibly can change RGB colour mild with one click on.

For the reason that TD500 MAX is fabricated from glass, there are massive openings on the entrance, backside and high of the case for warmth dissipation, and it’s outfitted with a detachable filter for simple cleansing. As well as, the facet panels of the glass facet and the ability provide storage space are locked with hand screws.

Within the case equipment division, along with the fundamental laborious drive slide rails, shock-absorbing gaskets, cable organizers, and cable ties, this case has a two-phase energy wire connection and water cooling built-in, so are the sources. Consists of 24pin, CPU 4 + 4Pin, 8pin and PCIe 8pin energy extension cables, in addition to clips and thermal pads for the newest processors from Intel and AMD.

Sharp-eyed readers ought to have observed that there are not any motherboard screws or laborious drive screws within the kits, proper? I am going to simply offer you an summary right here, and later once I introduce the case, I am going to point out the ingenuity of storing the elements of this case.

Inside particulars and association

The TD500 MAX case measures 499 x 210 x 500mm, with comparatively ample inside set up area It helps Mini-ITX and ATX motherboards, and graphics playing cards as much as 38 cm ‘lengthy. As for the followers, the entrance and high of the case can help as much as three units of 120mm followers or two units of 140mm followers, and one 120mm fan will be put in on the again of the case

The built-in water cooling is pre-installed on the entrance of the case and is supplied with three 120mm Mobius RGB followers.

CPU air cooling can help a peak of 165mm Principally, most air cooling merchandise available on the market aren’t sufficient bother for the precise set up, this will likely be confirmed later throughout implementation.

As for the storage system, the TD500 MAX additionally makes use of a set of detachable laborious disk racks situated in entrance of the ability provide. The laborious drive rack can accommodate two units of three.5″ units, and a set of two.5″ units will be put in on high.

By means of the absolutely modular 80Plus Platinum GXII 850W ATX 3.0 energy provide pre-installed and patented two-phase energy wire connector, TD500 MAX straight provides energy to the 24pin, 4 + 4Pin and 8Pin CPU and PCIe 8pin of the mom -board. to the ability provide, and the ATX 3.0 12VHPWR energy wire can also be pre-installed on the ability provide.

Maintain a socket straight within the case akin to the place of the mom, and set up it by the included wire extension to a 3.5-inch or 2.5-inch laborious drive. furthermore, you possibly can even join it to the mother-in-law’s facet.

As well as, a hidden screw storage field is designed in opening the unique energy provide subdivision cowl, which is fastened with a water cooling pump fabricated from recycled plastic to pack and cut back the usage of plastic, and is environmentally pleasant to each shoppers and the surroundings.

We’ve beforehand examined the cool MASTERLIQUID 360 ATMOS This built-in water cooling can also be used within the MAX household this time, and the efficiency is additional improved It’s outfitted with a 38mm thick water cooling radiator and extra air is changed and air strain.

The pre-installed water cooling pipe is related to the water cooling head from backside to high. observe

As for the wiring half, there’s a 4-pin fan and a 3-pin ARGB HUB on the again facet of the motherboard. lowering the issue of wiring and set up.

Set up an actual system

The set up itself makes use of a Gigabyte B760 Gaming WiFi D4 motherboard with ATX specs, join the board energy provide, 4 + 4Pin, 8Pin CPU energy provide, and the corresponding graphics card energy provide, after which add a USB enter and different cables It’s a lot simpler to insert from the entrance of the case.

Then set up the water cooling head buckle (bear in mind to peel off the protecting sticker on the copper backside of the water cooling head earlier than putting in it), lock the ATMOS water cooling head, join the water cooling head energy provide and ARGB cable, and eventually insert the graphics card, laborious disk and different units, and the meeting is mainly accomplished.

TD500 MAX is pre-installed with a 12VHPWR cable Principally, the present graphics playing cards will be put in and powered straight.

Set up expertise

By pre-installing the ability provide, built-in water cooling, two-phase energy cable design, and sufficient inside area, the set up itself really saves numerous steps and time, and the entire line simpler too, with a 1.9-centimeter stroll. contained in the facet panel Though the wire space isn’t very huge, so long as a number of wire bundles are prevented from overlapping, there isn’t any drawback in putting in and masking the facet panels .

As much as three units of 120 followers will be put in on the entrance and high, or two units of 150 followers will be put in at every With the 120mm fan area on the again, the air quantity and warmth dissipation effectivity is superb of the hidden screw storage field can also be superb, changing the earlier energy provide part The window is open for visible functions and the area is used for storage, whether or not when putting in a pc or upgrading elements, screws have a spot to place them and keep away from dropping them.

Lastly, I am unable to assist however point out a number of small issues that I feel will be improved after the precise set up the hidden screw storage compartment The latch will barely have an effect on the smoothness of the set up when putting in or eradicating the motherboard.

sensible take a look at

For the reason that TD500 MAX makes use of built-in water cooling ATMOS 360 thick, after all the i9-14900K have to be used with the RTX 4080. Since regular players might not use it for overclocking, regular frequencies and voltages have been used for take a look at.

take a look at platform

CPU

Intel i9-14900K

motherboard

Gigabyte B760 Gaming WiFi D4

A reminiscence

KLEVV BOLT XR DDR4-3600 8G*2

graphics card

NVIDIA GeForce RTX 4080 Founder’s Version

The take a look at is split into two elements With the ability wall limitation eliminated, the pc is first fired at regular CPU / AIO velocity for 20 minutes, after which fired once more at full velocity Get a -whether the airflow and air quantity of the TD500 MAX case is sufficient to deal with the day by day use of such high-end {hardware}.

Within the Aida64 Stress FPU take a look at, the CPU standby temperature was 51 levels in normal fan mode, the typical temperature after 20 minutes of burn-in reached 90.1 levels, the CPU bundle temperature was 94.8 levels, b CPU temperature at full velocity is 86.8 levels. , and the CPU bundle temperature was 90.5 levels Contemplating the surroundings in a closed case and outfitted with a 380mm thick radiator, this efficiency is superb.

The graphics card take a look at half adopts Furmark’s 20-minute burning take a look at When the fan velocity within the case is preset, the GPU temperature reaches 67.9 levels and the recent spot temperature is 78.5 levels full velocity , the temperature of the GPU is round 67.9 levels Celsius. It is suggested that the AIO fan velocity and graphics card fan velocity be set to regular mode to deal with day by day use.

Quiet idle

Silent burn

Full Idle

Full burn

CPU

43.4

90.1

37.9

86.8

CPU bundle

51

94.8

37.8

90.5

PCH

48.7

50.2

45.3

49.3

System 1

38.8

40.7

38.9

39.8

system 2

40

41

38.6

39.6

GPU

42

67.9

36.1

67.4

Important GPU location

51.9

78.5

45.1

77.9

Abstract

This time, the latest member of the Coolmax MAX household, TD500 MAX, inherits the unique TD500 case design, with good inside area configuration, gold GX2 850W ATX 3.0 energy provide pre-installed within the case, and 360 ATMOS all-in-one with 38mm thick water cooling radiator and actually extra handy wiring.

After buying the case, customers solely want easy set up steps to rapidly full the set up. Essentially the most time-consuming and troublesome step in your complete strategy of constructing a pc host, Kuma will make it easier to to was accomplished first, and also will present circumstances with a 2-year authentic manufacturing unit guarantee, a 5-year authentic manufacturing unit guarantee for the AIO water cooling, and a 10-year guarantee for the ability provide, making it very secure to make use of.

In case you are planning to purchase a brand new case or construct a brand new pc sooner or later, you’ve sufficient funds and also you need to save effort and time, you may need to take into account the TD500 MAX in your buy.