Canon releases updates for “R3”, “R5”, “R5 Mark II”, “R6”, “R6 Mark II”, “R7”, “R8”, “R10”, “R50”, “R100” – PRONEWS: A complete guide that gathers all information about video production

■ EOS R3 Firmware Version 1.8.0

1. During an FTP transfer,[画像プロテクト]and[レーティング]options are now available.
2. 
   [機内モード]but[入]In options[有線LAN]options are now available.
   

3. The following bugs have been fixed.
   
   

   • 3-1 Fixed the issue where Err70 could occur when disconnected from Wi-Fi.

   • 3-2.

   • 3-3. Fixed a phenomenon in which the camera would not accept operations when shooting while simultaneously working on touch operations on the monitor and buttons with special customization options.

   • 3-4.

■ EOS R5 Mark II Firmware Version 1.0.1

1. Fixed the issue that when shooting RAW/SRAW videos with a lens that does not communicate with the camera, a video file that cannot be played by the application software is recorded.

2. Improved stability of touch activity control when touch activity is set to “Sensitive”.

3. Fixed a phenomenon where the camera screen display could be abnormal when returning from the viewfinder.

4. Fixed a phenomenon where the camera would sometimes stop working properly if the shutter button was pressed while BUSY was displayed.

5. Fixed a phenomenon where Err70 could be displayed when the display terminal of the screen is switched between the viewer and the monitor while BUSY is displayed.

6. Fixed a phenomenon where the camera’s screen display could be abnormal after importing a video file image using EOS Utility.

7. Fixed an issue where video files shot using EOS Utility could not be played on the camera.

8. Optimum automatic white balance in certain environments when a custom photo function is turned on.

■ EOS R5 Firmware Version 2.1.0

1. When you use the new LP-E6P battery pack, you can now use it without any functional limitations. You will be able to shoot at the same continuous shooting speed as when using the LP-E6NH. In addition, you can charge the LP-E6P while it is inside the camera body.

2. During an FTP transfer,[画像プロテクト]and[レーティング]options are now available.
   

3. The following bugs have been fixed.
   
   

   • 3-1 Fixed the issue where Err70 could occur when disconnected from Wi-Fi.

   • 3-2.

   • 3-3.

■ EOS R6 Mark II Firmware Version 1.5.0

1. When you use the new LP-E6P battery pack, you can now use it without any functional limitations. You will be able to shoot at the same continuous shooting speed as when using the LP-E6NH. In addition, you can charge the LP-E6P while it is inside the camera body.

2. During an FTP transfer,[画像プロテクト]and[レーティング]options are now available.
   

3. Supports collaborative peripheral control function. When a compatible lens is attached, peripheral coordination control is performed (no need to place it on the tablet screen).
   

4. The following bugs have been fixed.
   
   

   • 4-1 to correct a phenomenon where Err70 could occur when shooting without high-frequency flicker and OVF View Assist is enabled and continuous shooting is performed using the electronic shutter method.

   • 4-2 Fixed the issue where Err70 could occur when disconnected from Wi-Fi.

   • 4-3. Fixed a phenomenon where, when shooting in high speed + continuous shooting with high brightness/gradation priority enabled, the subject could become out of focus at certain ISO sensitivities.

■ EOS R6 Firmware Version 1.9.0

1. When you use the new LP-E6P battery pack, you can now use it without any functional limitations. You will be able to shoot at the same continuous shooting speed as when using the LP-E6NH. In addition, you can charge the LP-E6P while it is inside the camera body.

2. The following bugs have been fixed.
   
   

   • 2-1.

   • 2-2 to fix a phenomenon where the camera could be out of focus at certain ISO sensitivities when shooting with high speed continuous shooting + with high brightness/leveling priority enabled.

■ EOS R7 Firmware Version 1.6.0

1. When you use the new LP-E6P battery pack, you can now use it without any functional limitations. You will be able to shoot at the same continuous shooting speed as when using the LP-E6NH. In addition, you can charge the LP-E6P while it is inside the camera body.

2. In a network connection,[WPA2][WPA3]now selected.
   

3. Added support for the software development kit (EDSDK/CCAPI) for digital cameras.

4. The following bugs have been fixed.
   
   

   • 4-1. Fixed the phenomenon where the “Accessories in use” message was displayed when the camera restarted from auto power when a SPEEDLITE EL-5 or EL-10 was installed (camera firmware Ver. 1.5 (only 0 occurs).

   • 4-2 fixed a phenomenon where the camera would sometimes go out of focus at certain ISO sensitivities when shooting with high speed + continuous shooting with high brightness/gradation priority enabled.

■ EOS R8 Firmware Version 1.4.0

1. In a network connection,[WPA2][WPA3]now selected.
   

2. Added support for the software development kit (EDSDK/CCAPI) for digital cameras.
   

3. The following bugs have been fixed.
   
   

   • 3-1. Fixed a phenomenon where Err70 could occur when high-frequency flicker-free shooting and OVF View Assist are enabled and continuous shooting is performed using the electronic shutter method.

■ EOS R10 Firmware Version 1.6.0

1. In a network connection,[WPA2][WPA3]now selected.
   

2. Added support for the software development kit (EDSDK/CCAPI) for digital cameras.
   

3. The following bugs have been fixed.
   
   

   • 3-1. Fixed the phenomenon that when the SPEEDLITE EL-5 or EL-10 was installed, the message “Accessory cannot be used” was displayed when the camera restarted from auto power (camera firmware Ver. 1.5 (only 0 occurs).

   • 3-2.

■ EOS R50 Firmware Version 1.3.0

1. In a network connection,[WPA2][WPA3]now selected.
   

2. Added support for the software development kit (EDSDK/CCAPI) for digital cameras.

3. The following bugs have been fixed.
   
   

   • 3-1 fixed, where the subject could be out of focus at some ISO sensitivities when shooting in high speed + continuous shooting with high brightness/leveling priority enabled.

■ EOS R100 Firmware Version 1.1.0

1. Added support for the software development kit (EDSDK/CCAPI) for digital cameras.