Bridge Collapse in Montana Sends Freight Train Carrying Hazardous Materials into Yellowstone River
COLUMBUS, Mont. – A bridge spanning the Yellowstone River in Montana collapsed early Saturday morning, causing portions of a freight train carrying hazardous materials to plunge into the rushing water below. The train cars were transporting hot asphalt and molten sulfur, according to Stillwater County Disaster and Emergency Services. As a precautionary measure, officials shut down drinking water intakes downstream while they assessed the potential danger following the 6 a.m. accident. An Associated Press reporter on the scene observed a yellow substance leaking from some of the tank cars.
David Stamey, the chief of emergency services for Stillwater County, assured that there was no immediate danger for the crews working at the site, as the hazardous material was being diluted by the swollen river. Currently, there are three asphalt cars and four sulfur cars in the river. Fortunately, the train crew is safe, and no injuries have been reported, stated Montana Rail Link spokesman Andy Garland.
Railroad crews have been dispatched to the scene in Stillwater County, near the town of Columbus, approximately 40 miles west of Billings. The area is located in a sparsely populated section of the Yellowstone River Valley, surrounded by ranches and farmland. It is important to note that the river flows away from Yellowstone National Park, which is about 110 miles southwest of the incident.
Garland emphasized the commitment to addressing any potential impacts resulting from the incident and understanding the reasons behind the bridge collapse. Meanwhile, the collapse also caused damage to a fiber-optic cable that provides internet service to numerous customers in the state, according to high-speed provider Global Net. The company’s phone line recording stated that this disruption affects all Global Net customers, with connectivity either being down or extremely slow.
In neighboring Yellowstone County, officials have implemented emergency measures at water treatment plants due to the possibility of a hazardous materials spill. They have also urged residents to conserve water. The cause of the bridge collapse is currently under investigation. Although the river was swollen due to recent heavy rains, it remains unclear whether this was a contributing factor.
The Yellowstone River experienced record flooding in 2022, resulting in extensive damage to Yellowstone National Park and nearby towns in Montana. Robert Bea, a retired engineering professor from the University of California Berkeley, who has analyzed numerous major disasters, suggested that repeated years of heavy river flows could be a clue to the possible cause. Bea explained that the high water flow exerts significant forces on the pier and river bottom, potentially leading to erosion or scour that weakens the foundation. These high forces increase the likelihood of a structural or foundation failure, which could trigger an accident.
It is worth noting that an old highway bridge, known as the Twin Bridges, which ran parallel to the railroad bridge, was removed in 2021 after the Montana Department of Transportation deemed it at risk of collapsing. The construction date and last inspection of the railroad bridge are currently unknown. Investigators will also examine the bridge components for signs of wear or rust, as well as review the maintenance, repair, and inspection records.
Officials from the Federal Railroad Administration are present at the scene to assist with the investigation. Kelly Hitchcock of the Columbus Water Users took immediate action to prevent the contents of the tank cars from reaching nearby farmland by shutting off the flow of river water into an irrigation ditch downstream from the collapsed bridge. The Stillwater County Sheriff’s Office alerted the group about the collapse on Saturday morning.
The U.S. Environmental Protection Agency has highlighted that sulfur is a common element used as a fertilizer, insecticide, fungicide, and rodenticide.
___
Johnson reported from Seattle.
How are officials working to minimize the impact of the bridge collapse and ensure the safety of the surrounding area while the repairs are being carried out
Under investigation, and it is unclear when the bridge will be repaired and reopened.
The bridge collapse in Montana has resulted in a freight train carrying hazardous materials plunging into the Yellowstone River. The train cars were transporting hot asphalt and molten sulfur, posing potential dangers to the surrounding area. As a precautionary measure, drinking water intakes downstream have been shut down while officials assess the situation.
Although a yellow substance is leaking from some of the tank cars, there is no immediate danger for the crews working at the site as the hazardous materials are being diluted by the swollen river. Thankfully, the train crew is safe and no injuries have been reported.
Railroad crews have been sent to the scene to address the situation and understand the cause of the bridge collapse. The incident has also damaged a fiber-optic cable, resulting in disruption to internet service for numerous customers.
In response to the possibility of a hazardous materials spill, emergency measures have been implemented at water treatment plants in neighboring Yellowstone County. Residents have been urged to conserve water until the situation is resolved.
The cause of the bridge collapse is currently under investigation, and there is no timeline for when the bridge will be repaired and reopened. Efforts are being made to address any potential impacts resulting from the incident and ensure the safety of the surrounding area.
This devastating bridge collapse in Montana not only poses a significant threat to the environment but also highlights the urgent need for stricter safety regulations and infrastructure maintenance measures. Our natural resources, like the Yellowstone River, are invaluable and deserve better protection.