Autofemol – Then don’t panic Indicator The probe runs for a while and then shuts down when the engine is started Motor matic.
BTW Indicator Mechanical testing Already on a motorbike that uses injection technology.
Mechanical testing The short fire benchmark time is about 2 seconds.
Also read: CVT matic motors quickly break down, often if done simultaneously
That too, BT. According to the technical service division of Astra Honda Motor, Endro Suderno is familiar.
“When the vehicle engine is turned on, the engine will start and die again in about two seconds.
This is normal and there are no signs of failure, “he said.
Even if the automatic motor is running, the check engine indicator or malfunction indicator light (MIL) will flash on the speedometer.
The problem is that the MIL indicator stays on even when the engine is running, so this is a sign of a problem.
There are many types of indicator lights that are continuously lit and glowing with a certain amount of light.
Also read: Buy a used automatic motorbike and be prepared to check this area to be safe, Sentosa
“Usually there are several types of strobing, continuous or flashing.
“There were a lot of flashes when blinking, that’s a sign of failure and now choices are made with these signs,” said Entro.
He further explained that if the light blinked it did not mean there was damage to the vehicle components and was not damaged.
This could be due to loose sockets, loose cables, damaged cables due to gaps, and the most recent symptom of faulty components.
Also read: Motorbikes stop at the Ojo Nesu Zebra Cross When pedestrians cross, there are rules!
“If the check engine is working, users don’t need to worry.
The important thing is that the engine is still alive and then we try to take it to an official workshop for inspection, “he said.
There are also cases where the check engine does not restart after the motor is reset to default.
This article has been published
Compass.com – Don’t panic, check if the engine is running, there’s no need to break anything
–
