Home » Business » How to Improve Traffic Flow on Expressways: Tips and Strategies

How to Improve Traffic Flow on Expressways: Tips and Strategies

When driving on a busy expressway and want to move forward even a little, many people drive in the passing lane if there are two or more lanes. There are fewer trucks with lower speed limits than passenger cars, and there are many drivers who want to drive faster, so the passing lane is generally faster. . In addition, lanes rarely merge or come out on the side of the passing lane, so it is less likely to be clogged.

However, when there is traffic, traffic can flow faster in the driving lane.

Text: Production M3
Featured image: Adobe Stock_Ichiro
Photo: Adobe Stock, Photo AC

Many cars converge on the passing lane, which makes the traffic flow worse.

It’s the same as thinking about a congested highway. In order to pass as quickly as possible, many drivers tend to choose the passing lane, but according to a university professor who studies traffic jams, this causes more cars gathering in the passing lane than in the left lane worse in passing lanes.

There are many cars in the left lane with slower vehicle speeds, and there are also merges and exits, so there is a perception that the flow is poor, but when the traffic is heavy, the congestion increase and the flow becomes poor, and congestion is more likely to occur (or Traffic congestion seems more likely to get worse.

The same goes for toll gates; for example, even if there are two lanes in front of the toll gate, there are often four or five toll gates, but in this case, cars gather in the lane where they can go straight through a selection of gates on either side will take you faster. You may have to get on the train again after going through the toll gate, but it’s a good idea to hurry.


When there is traffic, cars tend to pile up in the passing lane (PHOTO: Adobe Stock_show999)
When there is traffic, cars tend to pile up in the passing lane (PHOTO: Adobe Stock_show999)
At toll gates, cars tend to concentrate in the lane where they can go straight through, so gate selection on either side tends to be faster (PHOTO: Adobe Stock_BSDC)
At toll gates, cars tend to concentrate in the lane where they can go straight through, so gate selection on either side tends to be faster (PHOTO: Adobe Stock_BSDC)
At toll gates, cars tend to concentrate in the lane where they can go straight through, so gate selection on either side tends to be faster (PHOTO: Adobe Stock_BSDC)

If you stand in a line with many trucks and buses at the toll gate, you may be able to get through quickly.

When it comes to toll booths, people tend to avoid lines of large trucks and express buses because they reduce visibility, but one such large vehicle can hold up to two or even three standard passenger cars. to keep There are different lengths. If the length of the vehicle line is exactly the same, there will be fewer cars in that length, so it will move faster, and even when they merge after passing the toll gate, cars will merge one by one.

In addition, these large trucks and buses are used to traveling on expressways, so they merge smoothly after passing the toll gate, so they are less likely to have any problems. When it comes to toll booth congestion, choosing a line with lots of large trucks or buses could increase your chances of getting through quickly.

If you line up with a lot of trucks and buses at the toll gate, you might be able to get through faster!?  (PHOTO: Adobe Stock_BSDC)
At the toll gate, if you line up with a lot of trucks and buses, you might get through faster!?  (PHOTO: Adobe Stock_BSDC)
If you line up with a lot of trucks and buses at the toll gate, you might be able to get through faster!? (PHOTO: Adobe Stock_BSDC)

When there is traffic, be aware of the appropriate distance between vehicles.

When there is traffic, some drivers tend to close the distance between vehicles to avoid being cut in. However, keeping the distance of the vehicle too short not only causes trouble and accidents, but also causing problems in traffic jams lead to further deterioration. Especially in traffic jams where people are constantly moving at low speeds, by keeping a certain distance between vehicles (say 4 to 5 meters), small changes in the distance of a vehicle from the vehicle in front can be accommodated in with the speed, which is then transferred to the following vehicle.

However, it is also not a good idea to leave too much distance between vehicles. According to JAF, if you leave too much space between vehicles, those following you will tend to close the gap between them, causing new traffic jams. When driving in traffic jams or at the tail end of traffic jams, you should be aware of turning on your hazard lights, pumping the brakes, and keeping an appropriate distance between vehicles.

Overtaking vehicles in traffic jams not only causes accidents and problems, but also makes traffic congestion even worse (PHOTO: Adobe Stock_show999)
Overtaking vehicles in traffic jams not only causes accidents and problems, but also makes traffic congestion even worse (PHOTO: Adobe Stock_show999)
Overtaking vehicles in traffic jams not only causes accidents and problems, but also makes traffic congestion even worse (PHOTO: Adobe Stock_show999)

[Gailearaidh Ìomhaighean]Traffic applications on the expressway: the fast-flowing traffic is not in the passing lane, but in the driving lane (6 photos)

2024-05-04 01:00:00
#Freeway #traffic #jams #Fastflowing #traffic #isnt #passing #lane #driving #lane #Automobile #Information #Magazine #Car

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.