We will discuss how to replace the front motor gear seal below. Of course, how to replace the front gear seal component of the motorbike is quite easy. So you can apply automotive tips regarding this motor gear seal component easily.
For automotive enthusiasts who often tinker with motorbikes, of course, they are familiar with seals. But for people who don’t really like automotive, they may still be unfamiliar with it. The motor gear seal itself is a component that has an important role.
Seal is a component that has a function to hold oil so it does not leak. If the seal is damaged then the oil will leak and of course it can have a bad effect. It can even be dangerous for you when using a motorbike to drive.
How to replace the front motor gear seal that you can apply
The front gear seal is a component that you must replace, especially if it is damaged. If the seal is damaged, it will cause oil to leak and affect other motor components. This is what will then have a bad impact and interfere with motor performance.
The motor gear seal itself can be damaged due to several reasons. For example, that is due to exposure to heat from the engine, especially on seals that are not original. Because seals that are not original are indeed more easily damaged and won’t even last more than one year.
Read Also: Gear Motor Hard to Enter, Here’s the Cause and Solution
Then another cause is because the dose of engine oil is excessive than it should be. For example, the engine oil capacity is only 8000 cc, but the oil usage is up to 1000 cc. This can also damage the seal and eventually leak oil.
Because of that, like it or not, you have to find a way to replace the front gear seal of the motor. Especially for those of you who really want to replace it yourself but don’t know how. Then how do you replace the front gear seal? The following is a discussion:
Out of Gear
To replace the seal with a new one, of course you have to remove the front gear first. The first step you have to remove the chain cover and then remove the front gear of the motor first. Open one front gear bolt using a wrench.
After that you can immediately remove the two retaining bolts and remove the retaining plate. To remove the retaining plate you can rotate it slightly then pull until it is released. After that you can remove the gear and chain easily.
How to Replace the Motor Front Gear Seal by Removing the Seal
After the gear is released, you will see an area around the seal that is wet and dirty because of oil. This shows if the seal is really damaged and leaking. Before releasing the seal you can clean the surrounding area first.
Read Also: Motor Rear Gear, Make Sure To Replace The Right Size
The next way to replace the front gear seal is to remove the gear seal. Use a tool to pry and remove the seal, but be careful. Do not let you even damage the inside of the seal because it can be bad.
Install New Seal
After the old seal is released, you can install a new seal that is still good. To make installation easier, you can also apply a little oil in the middle of the seal. After that, slowly install the seal, you can rotate it.
To make sure the seal is actually installed inside you can use a tool to hit it. In how to replace the motor front gear seal, make sure to hit the seal evenly. The goal is that the seal can be installed precisely and perfectly.
In choosing a gear seal, make sure to choose a seal that is the right size. The size of the front gear seal of the motorbike is indeed different depending on the model and year of manufacture of the motorbike. Therefore you must know the right seal size for your motorbike.
In addition, don’t forget to choose a seal that is made of good quality materials or materials. Choose a seal made of heat, friction and wear-resistant material to make it last longer. With the right size and quality seal, the service life is also longer.
Replace Gear
After the new seal is installed, you can reinstall the motor gear. The method is also the same as removing it but in reverse order. To facilitate installation, you can also loosen the chain first.
Read Also: Worn Front As Gear, Recognize the Causes and How to Overcome Them
That’s how to replace the front motor gear seal that is damaged and leaking. If you can’t replace it yourself, don’t hesitate to take the motorbike to a regular repair shop. (R10/HR-Online)
2023-07-17 13:19:31
#Easily #Replace #Damaged #Motor #Front #Gear #Seal
