Bergasku.com – Series network And Parallel circuit On electricity.
Electricity comes from objects that produce an electric current.
Electric current flows from the positive pole to the negative pole.
The electrical circuits can be divided into “Series network ” And “Parallel networks“.
Tie the net
Tie the net is a series arranged in sequence and a parallel circuit is a circuit arranged in a row.
Each component in bonding network connected through a single line, so that one component will connect electricity to other components.
ON bonding networkthe intensity of the current flowing through all components is the same
Inside bonding networkeach component connects electricity to the other components.
How to build a simple serial network
How to do Series network Simple for elementary school / MI.
Necessary material:
- 3 pieces of 1.5 Volt batteries
-
Quite small cable
-
3 led lights or small bulbs
-
Scotch tape
-
Bulb connection
-
Battery case
-
Scissors
Preparation steps
-
Prepare 3 1.5 volt batteries and a battery case.
-
Arrange the batteries in the socket according to their poles.
-
Assemble the cables and batteries together with the ones that have been installed as shown in this picture.
-
Tape the wires connected to the light fixtures to make them resistant.
-
Attach a light bulb to each fitting
When it doesn’t turn on, do:
-
Check for broken cables
-
The battery pole is reversed for installation
-
The light bulb is broken
-
Installation of bulbs on loose fittings
Here is an example image Series network :
Parallel circuit
Parallel circuit is an electrical circuit whose components are arranged in a row so that all components have the same voltage source.
Inside parallel circuiteach component is connected to other components in a row so that the two legs of the components are connected together.
Properties of the parallel circuit
ON parallel circuit Generally the lamps installed in parallel light up in the same way and if there is a component disconnected, it does not affect the other lamps that are still alive.
How to create a simple parallel sequence
How to do Parallel circuit Simple for elementary school / MI:
Necessary material:
- 3 pieces of 1.5 Volt batteries
- Small wires at will (in parallel circuits this requires a longer cable than in series circuits)
- 3 led lights or small bulbs
- Tape or insulation
- Bulb connection
- Battery case
- Scissors
Preparation steps:
- Prepare 3 1.5 volt batteries and a battery case.
- Arrange the batteries in the socket according to the mounting polarity.
- Assemble the cable and battery together with the bulb as shown in this picture.
- Tape the wires connected to the light fixtures to make them resistant.
- Attach the bulb to the fitting snugly and properly.
When it doesn’t turn on, do:
- Check the wiring routing of the parallel circuit.
- The installation of the battery pole is upside down on the battery compartment.
- The bulb is broken or not working.
- Installation of bulk bulbs on the fittings
Example Parallel circuit :
–
