–
How to adjust the motor carburetor so that you can easily apply it to be economical. This will be a surefire trick for users of two-wheeled vehicles.
As we know, that the carburetor is also one of the important components in motor vehicles. Because, his job is to mix fuel and air during the engine process.
This motor component will spray the mixture into the combustion chamber. Therefore, if we can adjust it will make the fuel more efficient.
Baca Juga : Cara Membersihkan Karburator Motor Sendiri untuk Pemula
Then automatically we will save more expenses right? Well, take a look at the following discussion in more detail.
Here’s How to Adjust the Motorcycle Carburetor to be Efficient
Before making adjustments we must ensure the condition of the engine first. Make sure the engine is cold, because this will make it easier and more profitable.
Carburetor Maintenance
We must ensure that the carburetor is clean and service it regularly. Because when it is dirty it will clog and make the adjustment process constrained.
So make sure you clean and carry out proper and periodic maintenance. We also have to pay attention to whether the motor carburetor is adjusted correctly. Because if not, then the engine will not be powerful.
Preparing Equipment
Various tools that will be used such as screwdrivers and other keys. We recommend that you pay attention to the arrangement of the machines that we will work on. Min screwdriver to remove min screw when making adjustments.
Starting the Machine
How to adjust the motor carburetor so that it is more efficient then start the engine so that it is easier to adjust. Well, then we make the engine sound different from the original setting, by setting it stationary to engine speed.
This adjustment is quite important by turning it clockwise. Make sure to feel that the engine will turn off.
Baca Juga : Jenis Karburator Motor Berdasar Bentuk Venturi dan Katup Gas
After that we turn in the opposite direction to return the engine to a higher sound at first.
Not quite up there, you should lower the engine speed to what we want. Then we get the settings we want.
Testing Settings Results
Then, how to adjust the motor carburetor so that the next step is to re-check. When you’ve made the settings as you want, then have to test it.
The trick is to pull the gas lever but the transmission position must be neutral. Listen to the results of your settings, then if the sound is not good, try to disassemble it and do it like the steps above.
Consequences When Settings Don’t Fit
If you have managed to adjust the carburetor, then the fuel should be more durable. Then, you must check the condition of the gas adjusting screw and fuel line.
The height of the gas at the time of pulling this gas will be seen from the arrangement of the size of the gasoline line. So, there are not a few cases of self-adjustment that ignores the balance. So you will only make the carburetor easily damaged.
Baca Juga : Penyebab Karburator Banjir, Kenali 6 Faktor yang Berpengaruh
In addition, also pay attention to the results of the exhaust fumes. If the smoke that comes out of the exhaust is black, then the carburetor is clearly a problem.
Meanwhile, if the way to adjust the carburetor of the motor so that it is not appropriate, it will actually make the engine stutter and die. In fact, it doesn’t last long and the engine doesn’t even start.
Problems On Jet Play
One of the important components of this carburetor will affect the setting. It is small in the middle of the carburetor.
Main jet serves to help distribute gasoline to the carburetor. Through the flow of air and the process of the machine.
Do not let this component dirty and not maintained. Because it will definitely make the flow of gasoline is not smooth.
When this happens, the result of the mix is not ideal and the setting is not good. At that time the RPM was low and it became uncomfortable.
Carburetor Modification
How to adjust the carburetor of the motor so that it is economical also don’t make the wrong step. When some important components are replaced incorrectly, it results in low power and the risk of damage.
So the components of the needle of skepticism and the main jet should not be the wrong size. Modifications must take into account future conditions.
Then the potential of replacing these components will produce motor power. Therefore, you should not be too excessive when you want to make modifications.
Do it in consultation with an experienced person. In addition, make adjustments appropriately and consider its durability.
How to adjust the motor carburetor so that it is economical must still pay attention to the strength and power of the motor. Don’t just consider the economic aspect. Sometimes we want to save and actually damage and even add costs that should not be. (R10/HR-Online)
Editor: Adi Karyanto
–
