“5 Easy Ways to Strengthen Your WiFi Signal at Home”

Hitekno.com – More ways to easily strengthen the WiFi signal at home? try to follow the steps that Hitekno.com has summarized below.

It is undeniable that nowadays WiFi has become an important thing for life, especially for those of you who are working from home.

An unstable WiFi signal will certainly make it difficult for you and hinder your work.

If the WiFi signal is weak, most of us will immediately blame the operator, even though there may be a number of things in your house that hinder this WiFi signal.

Before you protest, it’s a good idea to do the steps below to strengthen the WiFi signal at home.

1. Choose the best place to put the router

Not all homes can distribute Wifi signals evenly. Because, where you place the router can greatly affect the range of your WiFi signal.

For those of you who are confused about choosing a place to put your WiFi router, try looking for the following places.

• Place your router in an open area, away from walls and obstructions to prevent interference and overheating.
• Place the router in the center of the house if possible, so that the signal can reach every corner of the house easily.
• Do not place the router far from the room where you work.
• Avoid equipment or electronics with heavy signal as operating it in close proximity may affect Wi-Fi performance.
• If your router has an external antenna, orient it vertically for increased range.

2. Check periodically, there may be WiFi intruders

One of the things that might be the cause of the slow WiFi signal in your home is intruders.

Maybe if it’s just one or two people, the WiFi signal will be stable. However, if 10 people infiltrate your WiFi network, it will greatly affect the signal strength.

Therefore, Hitekno.com recommends that you periodically check your WiFi signal to avoid intruders.

3. Attach the external antenna

If your router uses internal antennas, adding an external antenna is a good idea, as external antennas tend to transmit a stronger signal.

4. Maybe your router is out of date

This is an important aspect that you should also pay attention to. There is a possibility, the bad signal in your house is due to an outdated router.

Each router has a maximum range and bandwidth. Older or older routers are generally less reliable than the newest products.

Quoted from PCMag, for example, the maximum signal output for 802.11g is 54Mbps, while 802.11n reaches 300Mbps. The speeds can be even higher if you upgrade to a new router with the latest 802.11ac standard, which delivers up to 1Gbps.

5. Update firmware dan network adapter

It is undeniable that almost all router manufacturers regularly offer firmware updates.

Sometimes, these updates can improve router performance. To get the latest firmware updates for your router, visit your router manufacturer’s website.

Those are some ways to strengthen the WiFi signal at home that you can do.

Contributors: Sustainable Peace