1. Cleaning vinegar and water
This mixture is a miracle cure when you suffer from dirt and lime between the tiles. Mix the two components (equal parts) together and pour into a spray bottle. Spray the dirty grout with it and let it sit for at least 30 minutes. Then run a sponge over it and rinse with water.
Are your tiles themselves dirty? Then you can also use this remedy for that. So tackle it all at once and spray your tiles with the mixture as well.
2. Heavier Artillery: Bleach
Be careful with this tip, because bleach is an aggressive agent. So make sure you ventilate the room well when you start working with this and put on old clothes that may have permanent stains.
Dilute the bleach with some water and use an old toothbrush to scrub the grout with scrubbing until they reappear. white or gray to be. But beware, if you have dark joints, then bleach is not suitable for this. This actually makes the joint fade.
This can be quite a job. Then rinse the grout and tiles well with water and make sure that no bleach residue remains.
NB: Bleach can affect your sealant edges, so be careful not to let them come into contact with each other too much.
–
–
3. Fabric softener and water
This will also make the room smell nice! Mix some fabric softener with warm water and rub it into the joints you want to clean. Keep brushing until the joints are clean again. Then rinse it off with water and voila!
4. Baking soda
This product is also an all-rounder in the field of cleaning. From absorbing bad odors to making moisture disappear and also to use as a light abrasive. You can read here how to clean your joints in no time with baking soda.
5. Ready-made
Is all this too much work? Then you can of course always get a ready-to-use cleaning agent for joints in the store. It is wise to ventilate the room well and to put on older clothes.
To prevent
After you have made your joints spotless again, you naturally want them to stay that way forever. There are a number of factors that can contribute to maintaining clean joints. This way you can easily get a protective product for joints in the store. This creates a layer that repels grease, dirt and moisture. So ideal!
–
–
In addition, it is important that you continue to ventilate a room well. Mold, in particular, accumulates in the joints because of the humidity. By opening a window and leaving it open, much less moisture remains in the bathroom to be able to penetrate into the joints.
Finally, you can prevent dirty joints by paying close attention to your soapy water while cleaning. Is your mopping water or cleaning solution dirty? Then that dirt can also remain behind in the joints that you are trying to clean. So always make sure you have clean soapy water and change it when necessary.
Photocredits:
–
–
